Structural Materials.

Introduction to frustrated magnetism = materials, experiments, theory / by: (書目-語言資料,印刷品)

Concrete fracture models and applications by: (書目-語言資料,印刷品)

Modelling of corroding concrete structures = Proceedings of the Joint fib-RILEM Workshop held in Madrid, Spain, 22-23 November 2010 / by: (書目-語言資料,印刷品)

Supplementary cementing materials by: (書目-語言資料,印刷品)

Bonded cement-based material overlays for the repair, the lining or the strengthening of slabs or pavements = state-of-the-art report of the RILEM Technical Committee 193-RLS / by: (書目-語言資料,印刷品)

Atomic scale characterization and first-principles studies of Si3N4 interfaces by: (書目-語言資料,印刷品)

Sustainable automotive technologies 2011 = proceedings of the 3rd International Conference / by: (書目-語言資料,印刷品)

Piezoelectricity = evolution and future of a technology / by: (書目-語言資料,印刷品)

Multiscale Modeling and Simulation of Composite Materials and Structures by: (書目-語言資料,印刷品)

Eco-efficient construction and building materials by: (書目-語言資料,印刷品)

Computational techniques for structural health monitoring by: (書目-語言資料,印刷品)

ICAF 2011 structural integrity = influence of efficiency and green imperatives : proceedings of the 26th Symposium of the International Committee on Aeronautical Fatigue, Montreal, Canada, 1-3 June 2011 / by: (書目-語言資料,印刷品)

Ceramic and Glass Materials = Structure, Properties and Processing / by: (書目-語言資料,印刷品)

Self-Consistent Methods for Composites. Vol. 2. Wave Propagation in Heterogeneous Materials / by: (書目-語言資料,印刷品)

Injection molding = integration of theory and modeling methods / by: (書目-語言資料,印刷品)

Self-Consistent Methods for Composites = Vol.1: Static Problems / by: (書目-語言資料,印刷品)

Nanohybridization of organic-inorganic materials by: (書目-語言資料,印刷品)

Multifunctional metallic hollow sphere structures = manufacturing, properties and application / by: (書目-語言資料,印刷品)

Identification of damage using Lamb waves = from fundamentals to applications / by: (書目-語言資料,印刷品)

The science of construction materials by: (書目-語言資料,印刷品)

Crystallography of quasicrystals = concepts, methods and structures / by: (書目-語言資料,印刷品)

Ferroelectric crystals for photonic applications = including nanoscale fabrication and characterization techniques / by: (書目-語言資料,印刷品)

The mathematics and topology of fullerenes by: (書目-語言資料,印刷品)

Numerical modeling of concrete cracking by: (書目-語言資料,印刷品)

Fractal analysis in machining by: (書目-語言資料,印刷品)

Microstructured materials = inverse problems / by: (書目-語言資料,印刷品)

Piezoelectricity = evolution and future of a technology / by: (書目-語言資料,印刷品)

A conceptual model for designing recycled aggregate concrete for structural applications by: (書目-語言資料,印刷品)

Bridges = analysis, design, structural health monitoring, and rehabilitation / by: (書目-語言資料,印刷品)

Science of crystal structures = highlights in crystallography / by: (書目-語言資料,印刷品)

Adaptive, tolerant and efficient composite structures by: (書目-語言資料,印刷品)

Hygrothermal behavior, building pathology and durability by: (書目-語言資料,印刷品)

Isotopes in condensed matter by: (書目-語言資料,印刷品)

Sintering = mechanisms of convention nanodensification and field assisted processes / by: (書目-語言資料,印刷品)

Corrosion of constructional steels in marine and industrial environment = frontier work in atmospheric corrosion / by: (書目-語言資料,印刷品)

Imaging methods for novel materials and challenging applications. = Proceedings of the 2012 Annual Conference on Experimental and Applied Mechanics /. Volume 3 by: (書目-語言資料,印刷品)

Nondestructive testing of materials and structures = proceedings of NDTMS-2011, Istanbul, Turkey / by: (書目-語言資料,印刷品)

Strain hardening cement composites: Structural design and performance = State-of-the-art report of the RILEM Technical Committee 208-HFC, SC3 / by: (書目-語言資料,印刷品)

Green manufacturing processes and systems by: (書目-語言資料,印刷品)

Effective electron mass in low-dimensional semiconductors by: (書目-語言資料,印刷品)

Nuclear rocket engine reactor by: (書目-語言資料,印刷品)

High interstitial stainless austenitic steels by: (書目-語言資料,印刷品)

Proceedings of the FISITA 2012 World Automotive Congress.. Volume 7,. Vehicle design and testing (I) by: (書目-語言資料,印刷品)

Progress of recycling in the built environment = Final report of the RILEM Technical Committee 217-PRE / by: (書目-語言資料,印刷品)

Progress in advanced structural and functional materials design by: (書目-語言資料,印刷品)

Acoustic metamaterials = negative refraction, imaging, lensing and cloaking / by: (書目-語言資料,印刷品)

Recycled aggregate in concrete = use of industrial, construction and demolition waste / by: (書目-語言資料,印刷品)

Performance of cement-based materials in aggressive aqueous environments by: (書目-語言資料,印刷品)

Steels = from materials science to structural engineering / by: (書目-語言資料,印刷品)

Principles of loads and failure mechanisms = applications in maintenance, reliability and design / by: (書目-語言資料,印刷品)

Handbook of technical diagnostics = fundamentals and application to structures and systems / by: (書目-語言資料,印刷品)

Applied acoustics = concepts, absorbers, and silencers for acoustical comfort and noise control: Alternative solutions - Innovative tools - Practical examples / by: (書目-語言資料,印刷品)

Production of advanced materials by methods of self-propagating high-temperature synthesis by: (書目-語言資料,印刷品)

New trends in structural health monitoring by: (書目-語言資料,印刷品)

Effective properties of heterogeneous materials by: (書目-語言資料,印刷品)

Nanostructured materials for magnetoelectronics by: (書目-語言資料,印刷品)

Heat and mass transfer intensification and shape optimization = A Multi-scale Approach / by: (書目-語言資料,印刷品)

Micromechanisms of friction and wear = introduction to relativistic tribology / by: (書目-語言資料,印刷品)

Aperiodic crystals by: (書目-語言資料,印刷品)

Guide to Diagnosis and Appraisal of AAR Damage to Concrete in Structures.. Part 1,. Diagnosis (AAR 6.1) by: (書目-語言資料,印刷品)

Self-healing phenomena in cement-based materials = State-of-the-Art Report of RILEM Technical Committee 221-SHC: Self-Healing Phenomena in Cement-Based Materials / by: (書目-語言資料,印刷品)

Double-gyroid-structured functional materials = synthesis and applications / by: (書目-語言資料,印刷品)

Optical properties of advanced materials by: (書目-語言資料,印刷品)

Kenaf = a multi-purpose crop for several industrial applications : new insights from the Biokenaf Project / by: (書目-語言資料,印刷品)

Thermoelectric nanomaterials = materials design and applications / by: (書目-語言資料,印刷品)

Uranium processing and properties by: (書目-語言資料,印刷品)

Durability of building materials and components by: (書目-語言資料,印刷品)

Drilling of polymer-matrix composites by: (書目-語言資料,印刷品)

Springer handbook of nanomaterials by: (書目-語言資料,印刷品)

Reinforced polymer matrix syntactic foams = effect of nano and micro-scale reinforcement / by: (書目-語言資料,印刷品)

Dynamic localization phenomena in elasticity, acoustics and electromagnetism by: (書目-語言資料,印刷品)

Dispersion forces I = macroscopic quantum electrodynamics and ground-state Casimir, Casimir-Polder and van der Waals Forces / by: (書目-語言資料,印刷品)

Microstructure and properties of high-temperature superconductors by: (書目-語言資料,印刷品)

Modelling of powder die compaction by: (書目-語言資料,印刷品)

The physics of ferromagnetism by: (書目-語言資料,印刷品)

Manganese in powder metallurgy steels by: (書目-語言資料,印刷品)

Structural nanocomposites = perspectives for future applications / by: (書目-語言資料,印刷品)

Thermo-fluid behaviour of periodic cellular metals by: (書目-語言資料,印刷品)

Disorder and strain-induced complexity in functional materials by: (書目-語言資料,印刷品)

Fatigue of beta processed and beta heat-treated titanium alloys by: (書目-語言資料,印刷品)

Heterogeneous ferroelectric solid solutions = phases and domain states / by: (書目-語言資料,印刷品)

Advances in modeling concrete service life = proceedings of 4th International RILEM PhD Workshop held in Madrid, Spain, November19, 2010 / by: (書目-語言資料,印刷品)

Scale invariance = from phase transitions to turbulence / by: (書目-語言資料,印刷品)

Theory of arched structures = strength, stability, vibration / by: (書目-語言資料,印刷品)

Constitutive modelling in geomechanics = introduction / by: (書目-語言資料,印刷品)

Fracture mechanics by: (書目-語言資料,印刷品)

Application of super absorbent polymers (SAP) in concrete construction = State-of-the-Art report prepared by Technical Committee 225-SAP / by: (書目-語言資料,印刷品)

Non-destructive assessment of concrete structures = reliability and limits of single and combined techniques : state-of-the-art report of the RILEM Technical Committee 207-INR / by: (書目-語言資料,印刷品)

Structural connections for lightweight metallic structures by: (書目-語言資料,印刷品)

Unconventional superconductors = anisotropy and multiband effects / by: (書目-語言資料,印刷品)

Phase change in mechanics by: (書目-語言資料,印刷品)

The virtual fields method = extracting constitutive mechanical parameters from full-field deformation measurements / by: (書目-語言資料,印刷品)

Femtosecond laser micromachining = photonic and microfluidic devices in transparent materials / by: (書目-語言資料,印刷品)

Fatigue of structures and materials by: (書目-語言資料,印刷品)

IUTAM symposium on mechanical properties of cellular materials = proceedings of the IUTAM Symposium on Mechanical Properties of Cellular Materials, held September 17-20, 2007, LMT-Cachan, Cachan, France / by: (書目-語言資料,印刷品)

Engineering against fracture = proceedings of the 1st conference / by: (書目-語言資料,印刷品)

Ultra-fine grained steels by: (書目-語言資料,印刷品)

Nonlinear solid mechanics by: (書目-語言資料,印刷品)

Mechanics of microstructured solids = cellular materials, fibre reinforced solids and soft tissues / by: (書目-語言資料,印刷品)

Biologically inspired design = computational methods and tools / by: (書目-語言資料,印刷品)

Blast mitigation = experimental and numerical studies / by: (書目-語言資料,印刷品)

Theory of electroelasticity by: (書目-語言資料,印刷品)

Direct methods for limit states in structures and materials by: (書目-語言資料,印刷品)

Stone cladding engineering by: (書目-語言資料,印刷品)

Engineering viscoelasticity by: (書目-語言資料,印刷品)

Structural rehabilitation of old buildings by: (書目-語言資料,印刷品)

Materials and joints in timber structures = recent developments of technology / by: (書目-語言資料,印刷品)

Biotechnology of silk by: (書目-語言資料,印刷品)

Peridynamic theory and its applications by: (書目-語言資料,印刷品)

Compressive force-path method = unified ultimate limit-state design of concrete structures / by: (書目-語言資料,印刷品)

Modeling of carbon nanotubes, graphene and their composites by: (書目-語言資料,印刷品)

New composite materials = selection, design, and application / by: (書目-語言資料,印刷品)

Introduction to solid mechanics = an integrated approach / by: (書目-語言資料,印刷品)

Alkali activated materials = state-of-the-art report, RILEM TC 224-AAM / by: (書目-語言資料,印刷品)

Injection technologies for the repair of damaged concrete structures by: (書目-語言資料,印刷品)

Construction and building research by: (書目-語言資料,印刷品)

InCIEC 2013 = proceedings of the International Civil and Infrastructure Engineering Conference 2013 / by: (書目-語言資料,印刷品)

Mechanical properties of self-compacting concrete = state-of-the-art report of the RILEM technical committee 228-MPS on mechanical properties of self-compacting concrete / by: (書目-語言資料,印刷品)

Waste energy harvesting = mechanical and thermal energies / by: (書目-語言資料,印刷品)

Simulation of fresh concrete flow = state-of-the art report of the RILEM technical committee 222-SCF / by: (書目-語言資料,印刷品)

RILEM Technical Committee 195-DTD recommendation for test methods for AD and TD of early age concrete = round robin documentation report: program, test results and statistical evaluation / by: (書目-語言資料,印刷品)

Microstructuring of thermo-mechanically highly stressed surfaces = final report of the DFG Research Group 576 / by: (書目-語言資料,印刷品)

Handbook of damage mechanics = nano to macro scale for materials and structures / by: (書目-語言資料,印刷品)

Service life prediction of exterior plastics = vision for the future / by: (書目-語言資料,印刷品)

Large floating structures = technological advances / by: (書目-語言資料,印刷品)

Built heritage = monitoring conservation management / by: (書目-語言資料,印刷品)

Durability of reinforced concrete from composition to protection = selected papers of the 6th International RILEM PhD Workshop held in Delft, The Netherlands, July 4-5, 2013 / by: (書目-語言資料,印刷品)

Prediction of polymeric membrane separation and purification performances = a combined mechanical, chemical and thermodynamic model for organic systems / by: (書目-語言資料,印刷品)

Stochastic modeling of thermal fatigue crack growth by: (書目-語言資料,印刷品)

Nonlinear, tunable and active metamaterials by: (書目-語言資料,印刷品)

Biological materials of marine origin = vertebrates / by: (書目-語言資料,印刷品)

Porous carbons - hyperbranched polymers - polymer solvation by: (書目-語言資料,印刷品)

On shear behavior of structural elements made of steel fiber reinforced concrete by: (書目-語言資料,印刷品)

Fire-resistant geopolymers = role of fibres and fillers to enhance thermal properties / by: (書目-語言資料,印刷品)

Advances in structural engineering.. Volume three. Materials. by: (書目-語言資料,印刷品)

Advances in structural engineering.. Volume one. Mechanics. by: (書目-語言資料,印刷品)

Advances in structural engineering.. Volume two. Dynamics. by: (書目-語言資料,印刷品)

Auxetic materials and structures by: (書目-語言資料,印刷品)

Direct methods for limit and shakedown analysis of structures = advanced computational algorithms and material modelling / by: (書目-語言資料,印刷品)

Drying and energy technologies by: (書目-語言資料,印刷品)

Design and analysis of reinforced fiber composites by: (書目-語言資料,印刷品)

Advanced semiconducting materials and devices by: (書目-語言資料,印刷品)

Application of data mining techniques in the analysis of indoor hygrothermal conditions by: (書目-語言資料,印刷品)

Computer aided seismic and fire retrofitting analysis of existing high rise reinforced concrete buildings by: (書目-語言資料,印刷品)

Design procedures for the use of composites in strengthening of reinforced concrete structures = state-of-the-art report of the RILEM Technical Committee 234-DUC / by: (書目-語言資料,印刷品)

Tribology in sheet rolling technology by: (書目-語言資料,印刷品)

Magnetic interactions in molecules and solids by: (書目-語言資料,印刷品)

External thermal insulation composite systems (ETICS) = an evaluation of hygrothermal behaviour / by: (書目-語言資料,印刷品)

Energy performance of buildings = energy efficiency and built environment in temperate climates / by: (書目-語言資料,印刷品)

Materials with internal structure = multiscale and multifield modeling and simulation / by: (書目-語言資料,印刷品)

RRILEM recommendations for the prevention of damage by alkali-aggregate reactions in new concrete structures = state-of-the-art report of the RILEM Technical Committee 219-ACS / by: (書目-語言資料,印刷品)

Performance-based specifications and control of concrete durability = state-of-the-art report RILEM TC 230-PSC / by: (書目-語言資料,印刷品)

The automated design of materials far from equilibrium by: (書目-語言資料,印刷品)

Estimating fatality rates for earthquake loss models by: (書目-語言資料,印刷品)

Aluminum matrix composites reinforced with alumina nanoparticles by: (書目-語言資料,印刷品)

Materials research for manufacturing = an industrial perspective of turning materials into new products / by: (書目-語言資料,印刷品)

Fundamentals of structural engineering by: (書目-語言資料,印刷品)

Seismic behavior of steel storage pallet racking systems by: (書目-語言資料,印刷品)

Practical acoustic emission testing by: (書目-語言資料,印刷品)

Natural fibres = advances in science and technology towards industrial applications :: from science to market / by: (書目-語言資料,印刷品)

Terminal Ballistics by: (書目-語言資料,印刷品)

Recent developments in building diagnosis techniques by: (書目-語言資料,印刷品)

Petrographic atlas = characterisation of aggregates regarding potential reactivity to alkalis : RILEM TC 219-ACS recommended guidance AAR-1.2, for use with the RILEM AAR-1.1 petrographic examination method / by: (書目-語言資料,印刷品)

New approaches to building pathology and durability by: (書目-語言資料,印刷品)

Sustainable construction = building performance simulation and asset and maintenance management / by: (書目-語言資料,印刷品)

Advances in fluid-structure interaction = updated contributions reflecting new findings presented at the ERCOFTAC Symposium on Unsteady Separation in Fluid-Structure Interaction, 17-21 June 2013, St. John Resort, Mykonos, Greece / by: (書目-語言資料,印刷品)

Case studies of building pathology in cultural heritage by: (書目-語言資料,印刷品)

Commercial aircraft composite technology by: (書目-語言資料,印刷品)

Innovative AE and NDT techniques for on-site measurement of concrete and masonry structures = state-of-the-art report of the RILEM Technical Committee 239-MCM / by: (書目-語言資料,印刷品)

Advanced methods of continuum mechanics for materials and structures by: (書目-語言資料,印刷品)

Dynamics of smart systems and structures = concepts and applications / by: (書目-語言資料,印刷品)

Fire resistance in American heavy timber construction = history and preservation / by: (書目-語言資料,印刷品)

Fatigue crack growth = detect - assess - avoid / by: (書目-語言資料,印刷品)

InCIEC 2015 = proceedings of the International Civil and Infrastructure Engineering Conference / by: (書目-語言資料,印刷品)

Triboluminescence = theory, synthesis, and application / by: (書目-語言資料,印刷品)

Discrete optimization in architecture = architectural & urban layout / by: (書目-語言資料,印刷品)

Historical earthquake-resistant timber framing in the Mediterranean area = HEaRT 2015 / by: (書目-語言資料,印刷品)

Sustainability improvements in the concrete industry = use of recycled materials for structural concrete production / by: (書目-語言資料,印刷品)

Biocompatible glasses = from bone regeneration to cancer treatment / by: (書目-語言資料,印刷品)

Fatigue of Materials II = advances and emergences in understanding : proceedings of a symposium sponsored by Mechanical Behavior Committee of the Minerals, Metals & Materials Society (TMS) and ASM International held during Materials Science & Technology 2012 (MS&T' 12) October 7-11, 2012 in Pittsburgh, Pennsylvania / by: (書目-語言資料,印刷品)

3D MS = proceedings of the 2nd International Congress on 3D Materials Science : held by June 29-July 2, 2014, L'Imperial Palace, Annecy, France / by: (書目-語言資料,印刷品)

Diffusion in solids by: (書目-語言資料,印刷品)

Proceedings of the 1st International Conference on 3D Materials Science = held July 8-12, 2012, Seven Springs Mountain Resort, Seven Springs, Pennsylvania, USA / by: (書目-語言資料,印刷品)

Concrete durability = cementitious materials and reinforced concrete properties, behavior and corrosion resistance / by: (書目-語言資料,印刷品)

A little book about BIG chemistry = the story of man-made polymers / by: (書目-語言資料,印刷品)

Reinforced concrete design to Eurocode 2 by: (書目-語言資料,印刷品)

Recent advances on green concrete for structural purposes = the contribution of the EU-FP7 Project EnCoRe / by: (書目-語言資料,印刷品)

An introduction to the mathematical theory of dynamic materials by: (書目-語言資料,印刷品)

Deformation and fracture behaviour of polymer materials by: (書目-語言資料,印刷品)

Bamboo = the multipurpose plant / by: (書目-語言資料,印刷品)

Advanced materials = techniques, physics, mechanics and applications / by: (書目-語言資料,印刷品)

GraphITA = selected papers from the Workshop on Synthesis, Characterization and Technological Exploitation of Graphene and 2D Materials Beyond Graphene / by: (書目-語言資料,印刷品)

Tetrahedrally bonded amorphous carbon films I = basics, structure and preparation / by: (書目-語言資料,印刷品)

Heterogeneous ferroelectric solid solutions = phases and domain states / by: (書目-語言資料,印刷品)

Insights into the chemistry of organic structure-directing agents in the synthesis of zeolitic materials by: (書目-語言資料,印刷品)

Structural chemistry = principles, methods, and case studies / by: (書目-語言資料,印刷品)

International Congress on Polymers in Concrete (ICPIC 2018) = polymers for resilient and sustainable concrete infrastructure / by: (書目-語言資料,印刷品)

Engineering mechanics.. 2,. Mechanics of materials by: (書目-語言資料,印刷品)

Fractography and failure analysis by: (書目-語言資料,印刷品)

Thermal protection modeling of hypersonic flying apparatus by: (書目-語言資料,印刷品)

Coherent structures in granular crystals = from experiment and modelling to computation and mathematical analysis / by: (書目-語言資料,印刷品)

High performance structural materials = proceedings of Chinese Materials Conference 2017 / by: (書目-語言資料,印刷品)

Proceedings of Italian Concrete Days 2016 by: (書目-語言資料,印刷品)

Trends in applications of mathematics to mechanics by: (書目-語言資料,印刷品)

Progress in materials science and engineering by: (書目-語言資料,印刷品)

An introduction to structural mechanics for architects by: (書目-語言資料,印刷品)

Optical phenomenology and applications = health monitoring for infrastructure materials and the environment / by: (書目-語言資料,印刷品)

Mechanisms of cracking and debonding in asphalt and composite pavements = state-of-the-art of the RILEM TC 241-MCD / by: (書目-語言資料,印刷品)

Advanced materials = proceedings of the International Conference on "Physics and Mechanics of New Materials and Their Applications", PHENMA 2017 / by: (書目-語言資料,印刷品)

The selected models of the mesostructure of composites = percolation, clusters, force fields / by: (書目-語言資料,印刷品)

Stringer-panel models in structural concrete = applied to D-region design / by: (書目-語言資料,印刷品)

Chemical thermodynamics in materials science = from basics to practical applications / by: (書目-語言資料,印刷品)

Field-assisted sintering = science and applications / by: (書目-語言資料,印刷品)

Structure and reactivity of metals in zeolite materials by: (書目-語言資料,印刷品)

Polysaccharide based hybrid materials = metals and metal oxides, graphene and carbon nanotubes / by: (書目-語言資料,印刷品)

Topology in magnetism by: (書目-語言資料,印刷品)

Metal matrix composites = wetting and infiltration / by: (書目-語言資料,印刷品)

Solidification processing of metallic alloys under external fields by: (書目-語言資料,印刷品)

Fatigue of materials at very high numbers of loading cycles = experimental techniques, mechanisms, modeling and fatigue life assessment / by: (書目-語言資料,印刷品)

10th International Symposium on the Conservation of Monuments in the Mediterranean Basin = natural and anthropogenic hazards and sustainable preservation / by: (書目-語言資料,印刷品)

Lock-in thermography = basics and use for evaluating electronic devices and materials / by: (書目-語言資料,印刷品)

Thin-walled laminated structures = buckling, vibrations and their suppression / by: (書目-語言資料,印刷品)

Environmentally friendly zeolites = synthesis and source materials / by: (書目-語言資料,印刷品)

Glassy nuclei in amorphous ice = novel evidence for the two-liquids nature of water / by: (書目-語言資料,印刷品)

Proceedings of the Second International Conference on Theoretical, Applied and Experimental Mechanics by: (書目-語言資料,印刷品)

Handbook on concrete block paving by: (書目-語言資料,印刷品)

Mechanical properties of silicon based compounds = silicides / by: (書目-語言資料,印刷品)

Dense and green building typologies = design perspectives / by: (書目-語言資料,印刷品)

Advanced materials = proceedings of the International Conference on "Physics and Mechanics of New Materials and Their Applications", PHENMA 2018 / by: (書目-語言資料,印刷品)

Simplified theory of plastic zones = based on Zarka's method / by: (書目-語言資料,印刷品)

The pre-fabrication of building facades by: (書目-語言資料,印刷品)

Concrete structures by: (書目-語言資料,印刷品)

Overhead lines by: (書目-語言資料,印刷品)

Challenges in mechanics of time dependent materials. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /. Volume 2 by: (書目-語言資料,印刷品)

Advances on mechanics, design engineering and manufacturing = proceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing (JCM 2016), 14-16 September, 2016, Catania, Italy / by: (書目-語言資料,印刷品)

Discrete optimization in architecture = building envelope / by: (書目-語言資料,印刷品)

Jute geotextiles and their applications in civil engineering by: (書目-語言資料,印刷品)

Discontinuous-fibre reinforced composites = fundamentals of stress transfer and fracture mechanics / by: (書目-語言資料,印刷品)

Aluminum and magnesium metal matrix nanocomposites by: (書目-語言資料,印刷品)

Construction biotechnology = biogeochemistry, microbiology and biotechnology of construction materials and processes / by: (書目-語言資料,印刷品)

Prognostics and health management of engineering systems = an introduction / by: (書目-語言資料,印刷品)

Steel fiber reinforced concrete = behavior, modelling and design / by: (書目-語言資料,印刷品)

Avalanches in functional materials and geophysics by: (書目-語言資料,印刷品)

Information materials = smart materials for adaptive architecture / by: (書目-語言資料,印刷品)

Powder consolidation using cold spray = process modeling and emerging applications / by: (書目-語言資料,印刷品)

Aerospace materials and material technologies.. Volume 1,. Aerospace materials by: (書目-語言資料,印刷品)

Aerospace materials and material technologies.. Volume 2,. Aerospace material technologies by: (書目-語言資料,印刷品)

Smart structures and materials = selected papers from the 7th ECCOMAS Thematic Conference on Smart Structures and Materials / by: (書目-語言資料,印刷品)

Creep behaviour in cracked sections of fibre reinforced concrete = proceedings of the International RILEM Workshop FRC-CREEP 2016 / by: (書目-語言資料,印刷品)

Durability of critical infrastructure, monitoring and testing = proceedings of the ICDCF 2016 / by: (書目-語言資料,印刷品)

Rare metal technology 2017 by: (書目-語言資料,印刷品)

Mechanical and creep behavior of advanced materials = a SMD symposium honoring Professor K. Linga Murty / by: (書目-語言資料,印刷品)

Characterization of minerals, metals, and materials 2017 by: (書目-語言資料,印刷品)

Development of recycled polypropylene plastic fibres to reinforce concrete by: (書目-語言資料,印刷品)

Functionally graded materials by: (書目-語言資料,印刷品)

Flows in Polymers, Reinforced Polymers and Composites = A Multi-Scale Approach / by: (書目-語言資料,印刷品)

Fabrication of Heat-Resistant and Plastic-Formable Silicon Nitride by: (書目-語言資料,印刷品)

Service Life Prediction of Exterior Plastics = Vision for the Future / by: (書目-語言資料,印刷品)

Nonlinear, Tunable and Active Metamaterials by: (書目-語言資料,印刷品)

Built Heritage: Monitoring Conservation Management by: (書目-語言資料,印刷品)

Porous Carbons – Hyperbranched Polymers – Polymer Solvation by: (書目-語言資料,印刷品)

Molecular Dynamics Simulations of Disordered Materials = From Network Glasses to Phase-Change Memory Alloys / by: (書目-語言資料,印刷品)

Microstructuring of Thermo-Mechanically Highly Stressed Surfaces = Final Report of the DFG Research Group 576 / by: (書目-語言資料,印刷品)

Lanthanide Single Molecule Magnets by: (書目-語言資料,印刷品)

Auxetic Materials and Structures by: (書目-語言資料,印刷品)

Stochastic Modeling of Thermal Fatigue Crack Growth by: (書目-語言資料,印刷品)

Materials for Construction and Civil Engineering = Science, Processing, and Design / by: (書目-語言資料,印刷品)

Advances in Structural Engineering = Mechanics, Volume One / by: (書目-語言資料,印刷品)

Advances in Structural Engineering = Materials, Volume Three / by: (書目-語言資料,印刷品)

Bridges = Analysis, Design, Structural Health Monitoring, and Rehabilitation / by: (書目-語言資料,印刷品)

Handbook of Damage Mechanics = Nano to Macro Scale for Materials and Structures / by: (書目-語言資料,印刷品)

Large Floating Structures = Technological Advances / by: (書目-語言資料,印刷品)

Integrierte Schadenanalyse = Technikgestaltung und das System des Versagens / by: (書目-語言資料,印刷品)

PCM-Enhanced Building Components = An Application of Phase Change Materials in Building Envelopes and Internal Structures / by: (書目-語言資料,印刷品)

RILEM Technical Committee 195-DTD Recommendation for Test Methods for AD and TD of Early Age Concrete = Round Robin Documentation Report: Program, Test Results and Statistical Evaluation / by: (書目-語言資料,印刷品)

Advances in Structural Engineering = Dynamics, Volume Two / by: (書目-語言資料,印刷品)

Direct Methods for Limit and Shakedown Analysis of Structures = Advanced Computational Algorithms and Material Modelling / by: (書目-語言資料,印刷品)

Einführung in die bruchmechanische Schadensbeurteilung by: (書目-語言資料,印刷品)

Calcined Clays for Sustainable Concrete = Proceedings of the 1st International Conference on Calcined Clays for Sustainable Concrete / by: (書目-語言資料,印刷品)

Prediction of Polymeric Membrane Separation and Purification Performances = A Combined Mechanical, Chemical and Thermodynamic Model for Organic Systems / by: (書目-語言資料,印刷品)

Nanotechnology in Construction = Proceedings of NICOM5 / by: (書目-語言資料,印刷品)

Fire-Resistant Geopolymers = Role of Fibres and Fillers to Enhance Thermal Properties / by: (書目-語言資料,印刷品)

A Conceptual Model for Designing Recycled Aggregate Concrete for Structural Applications by: (書目-語言資料,印刷品)

Mechanical and Materials Engineering of Modern Structure and Component Design by: (書目-語言資料,印刷品)

Biological Materials of Marine Origin = Vertebrates / by: (書目-語言資料,印刷品)

Durability of Reinforced Concrete from Composition to Protection = Selected Papers of the 6th International RILEM PhD Workshop held in Delft, The Netherlands, July 4-5, 2013 / by: (書目-語言資料,印刷品)

Furniture Design by: (書目-語言資料,印刷品)

Science of Crystal Structures = Highlights in Crystallography / by: (書目-語言資料,印刷品)

Kristallstrukturbestimmung by: (書目-語言資料,印刷品)

Design and Modeling of Mechanical Systems - II = Proceedings of the Sixth Conference on Design and Modeling of Mechanical Systems, CMSM'2015, March 23-25, Hammamet, Tunisia / by: (書目-語言資料,印刷品)

On Shear Behavior of Structural Elements Made of Steel Fiber Reinforced Concrete by: (書目-語言資料,印刷品)

Synthesis, Properties and Application of Graphene Woven Fabrics by: (書目-語言資料,印刷品)

Reliability of Steel Columns Protected by Intumescent Coatings Subjected to Natural Fires by: (書目-語言資料,印刷品)

Plastic Tests Plastics = A Toy Brick Tensometer for Electromechanical Characterization of Elastomers / by: (書目-語言資料,印刷品)

InCIEC 2014 = Proceedings of the International Civil and Infrastructure Engineering Conference 2014 / by: (書目-語言資料,印刷品)

Electrochemically Engineered Nanoporous Materials = Methods, Properties and Applications / by: (書目-語言資料,印刷品)

Triboluminescence = Theory, Synthesis, and Application / by: (書目-語言資料,印刷品)

Computer Aided Seismic and Fire Retrofitting Analysis of Existing High Rise Reinforced Concrete Buildings by: (書目-語言資料,印刷品)

RILEM Recommendations for the Prevention of Damage by Alkali-Aggregate Reactions in New Concrete Structures = State-of-the-Art Report of the RILEM Technical Committee 219-ACS / by: (書目-語言資料,印刷品)

Petrographic Atlas: Characterisation of Aggregates Regarding Potential Reactivity to Alkalis = RILEM TC 219-ACS Recommended Guidance AAR-1.2, for Use with the RILEM AAR-1.1 Petrographic Examination Method / by: (書目-語言資料,印刷品)

Biocompatible Glasses = From Bone Regeneration to Cancer Treatment / by: (書目-語言資料,印刷品)

Advanced Semiconducting Materials and Devices by: (書目-語言資料,印刷品)

Magnetic Interactions in Molecules and Solids by: (書目-語言資料,印刷品)

The Automated Design of Materials Far From Equilibrium by: (書目-語言資料,印刷品)

Application of Data Mining Techniques in the Analysis of Indoor Hygrothermal Conditions by: (書目-語言資料,印刷品)

Recent Developments in Building Diagnosis Techniques by: (書目-語言資料,印刷品)

Advanced Methods of Continuum Mechanics for Materials and Structures by: (書目-語言資料,印刷品)

External Thermal Insulation Composite Systems (ETICS) = An Evaluation of Hygrothermal Behaviour / by: (書目-語言資料,印刷品)

Fire Resistance in American Heavy Timber Construction = History and Preservation / by: (書目-語言資料,印刷品)

1st International Conference on 3D Materials Science, 2012 = Conference Proceedings / by: (書目-語言資料,印刷品)

Historical Earthquake-Resistant Timber Framing in the Mediterranean Area = HEaRT 2015 / by: (書目-語言資料,印刷品)

Advances in Fluid-Structure Interaction = Updated contributions reflecting new findings presented at the ERCOFTAC Symposium on Unsteady Separation in Fluid-Structure Interaction, 17-21 June 2013, St John Resort, Mykonos, Greece / by: (書目-語言資料,印刷品)

Diffusion in Solids by: (書目-語言資料,印刷品)

Estimating Fatality Rates for Earthquake Loss Models by: (書目-語言資料,印刷品)

Seismic Behavior of Steel Storage Pallet Racking Systems by: (書目-語言資料,印刷品)

Materials with Internal Structure = Multiscale and Multifield Modeling and Simulation / by: (書目-語言資料,印刷品)

Case Studies of Building Pathology in Cultural Heritage by: (書目-語言資料,印刷品)

Performance-Based Specifications and Control of Concrete Durability = State-of-the-Art Report RILEM TC 230-PSC / by: (書目-語言資料,印刷品)

Sustainability Improvements in the Concrete Industry = Use of Recycled Materials for Structural Concrete Production / by: (書目-語言資料,印刷品)

InCIEC 2015 = Proceedings of the International Civil and Infrastructure Engineering Conference / by: (書目-語言資料,印刷品)

Dynamics of Smart Systems and Structures = Concepts and Applications / by: (書目-語言資料,印刷品)

Practical Acoustic Emission Testing by: (書目-語言資料,印刷品)

Drying and Energy Technologies by: (書目-語言資料,印刷品)

Fatigue Crack Growth = Detect - Assess - Avoid / by: (書目-語言資料,印刷品)

Innovative AE and NDT Techniques for On-Site Measurement of Concrete and Masonry Structures = State-of-the-Art Report of the RILEM Technical Committee 239-MCM / by: (書目-語言資料,印刷品)

Discrete Optimization in Architecture = Architectural & Urban Layout / by: (書目-語言資料,印刷品)

Energy Performance of Buildings = Energy Efficiency and Built Environment in Temperate Climates / by: (書目-語言資料,印刷品)

Sustainable Construction = Building Performance Simulation and Asset and Maintenance Management / by: (書目-語言資料,印刷品)

New Approaches to Building Pathology and Durability by: (書目-語言資料,印刷品)

Design and Analysis of Reinforced Fiber Composites by: (書目-語言資料,印刷品)

Commercial Aircraft Composite Technology by: (書目-語言資料,印刷品)

8th RILEM International Symposium on Testing and Characterization of Sustainable and Innovative Bituminous Materials by: (書目-語言資料,印刷品)

Fatigue of Materials II = Advances and Emergences in Understanding / by: (書目-語言資料,印刷品)

Aluminum Matrix Composites Reinforced with Alumina Nanoparticles by: (書目-語言資料,印刷品)

Terminal Ballistics by: (書目-語言資料,印刷品)

Sicherheitsbewertung von Composite-Druckgasbehältern = Potential statistischer Methoden jenseits aktueller Vorschriften / by: (書目-語言資料,印刷品)

Materials Research for Manufacturing = An Industrial Perspective of Turning Materials into New Products / by: (書目-語言資料,印刷品)

Design Procedures for the Use of Composites in Strengthening of Reinforced Concrete Structures = State-of-the-Art Report of the RILEM Technical Committee 234-DUC / by: (書目-語言資料,印刷品)

Tribology in Sheet Rolling Technology by: (書目-語言資料,印刷品)

The 2nd International Congress on 3D Materials Science = Congress Proceedings / by: (書目-語言資料,印刷品)

Fundamentals of Structural Engineering by: (書目-語言資料,印刷品)

Natural Fibres: Advances in Science and Technology Towards Industrial Applications = From Science to Market / by: (書目-語言資料,印刷品)

Fatigue of Materials at Very High Numbers of Loading Cycles = Experimental Techniques, Mechanisms, Modeling and Fatigue Life Assessment / by: (書目-語言資料,印刷品)

Solidification Processing of Metallic Alloys Under External Fields by: (書目-語言資料,印刷品)

Viscoelastic Properties of Asphalts Based on Penetration and Softening Point by: (書目-語言資料,印刷品)

Buckling and Postbuckling of Beams, Plates, and Shells by: (書目-語言資料,印刷品)

Composite Materials Engineering, Volume 2 = Different Types of Composite Materials / by: (書目-語言資料,印刷品)

Field-Assisted Sintering = Science and Applications / by: (書目-語言資料,印刷品)

Lock-in Thermography = Basics and Use for Evaluating Electronic Devices and Materials / by: (書目-語言資料,印刷品)

Proceedings of Italian Concrete Days 2016 by: (書目-語言資料,印刷品)

Metal Matrix Composites = Wetting and Infiltration / by: (書目-語言資料,印刷品)

10th International Symposium on the Conservation of Monuments in the Mediterranean Basin = Natural and Anthropogenic Hazards and Sustainable Preservation / by: (書目-語言資料,印刷品)

Polysaccharide Based Hybrid Materials = Metals and Metal Oxides, Graphene and Carbon Nanotubes / by: (書目-語言資料,印刷品)

Structure and Reactivity of Metals in Zeolite Materials by: (書目-語言資料,印刷品)

Topology in Magnetism by: (書目-語言資料,印刷品)

Methods of Measuring Moisture in Building Materials and Structures = State-of-the-Art Report of the RILEM Technical Committee 248-MMB / by: (書目-語言資料,印刷品)

Advanced Methods and Technologies in Metallurgy in Russia by: (書目-語言資料,印刷品)

Heterogeneous Ferroelectric Solid Solutions = Phases and Domain States / by: (書目-語言資料,印刷品)

Proceedings of the 17th International Conference on New Trends in Fatigue and Fracture by: (書目-語言資料,印刷品)

Chemical Thermodynamics in Materials Science = From Basics to Practical Applications / by: (書目-語言資料,印刷品)

High Tech Concrete: Where Technology and Engineering Meet = Proceedings of the 2017 fib Symposium, held in Maastricht, The Netherlands, June 12-14, 2017 / by: (書目-語言資料,印刷品)

Advances in Computational Plasticity = A Book in Honour of D. Roger J. Owen / by: (書目-語言資料,印刷品)

International Congress on Polymers in Concrete (ICPIC 2018) = Polymers for Resilient and Sustainable Concrete Infrastructure / by: (書目-語言資料,印刷品)

Strengthening and Retrofitting of Existing Structures by: (書目-語言資料,印刷品)

Rare Metal Technology 2018 by: (書目-語言資料,印刷品)

Wooden Domes = History and Modern Times / by: (書目-語言資料,印刷品)

High Performance Structural Materials = Proceedings of Chinese Materials Conference 2017 / by: (書目-語言資料,印刷品)

Coherent Structures in Granular Crystals = From Experiment and Modelling to Computation and Mathematical Analysis / by: (書目-語言資料,印刷品)

Von Rubinen und Implantaten = Aluminiumoxid und seine vielfältige Welt / by: (書目-語言資料,印刷品)

Trends in Applications of Mathematics to Mechanics by: (書目-語言資料,印刷品)

Werkstoffkunde by: (書目-語言資料,印刷品)

Seismic Fragility Assessment for Buildings due to Earthquake Excitation by: (書目-語言資料,印刷品)

Progress in Materials Science and Engineering by: (書目-語言資料,印刷品)

Equivalent Stress Concept for Limit State Analysis by: (書目-語言資料,印刷品)

Advanced Materials = Proceedings of the International Conference on “Physics and Mechanics of New Materials and Their Applications”, PHENMA 2017 / by: (書目-語言資料,印刷品)

An Introduction to Structural Mechanics for Architects by: (書目-語言資料,印刷品)

Mechanisms of Cracking and Debonding in Asphalt and Composite Pavements = State-of-the-Art of the RILEM TC 241-MCD / by: (書目-語言資料,印刷品)

Optical Phenomenology and Applications = Health Monitoring for Infrastructure Materials and the Environment / by: (書目-語言資料,印刷品)

Strukturfarben im Brennpunkt der Bionik = Zwischen Kunst und Naturwissenschaften / by: (書目-語言資料,印刷品)

Engineering Mechanics 2 = Mechanics of Materials / by: (書目-語言資料,印刷品)

Tetrahedrally Bonded Amorphous Carbon Films I = Basics, Structure and Preparation / by: (書目-語言資料,印刷品)

Fractography and Failure Analysis by: (書目-語言資料,印刷品)

Stringer-Panel Models in Structural Concrete = Applied to D-region Design / by: (書目-語言資料,印刷品)

The Selected Models of the Mesostructure of Composites = Percolation, Clusters, and Force Fields / by: (書目-語言資料,印刷品)

An Isogeometric Approach to Beam Structures = Bridging the Classical to Modern Technique / by: (書目-語言資料,印刷品)

Insights into the Chemistry of Organic Structure-Directing Agents in the Synthesis of Zeolitic Materials by: (書目-語言資料,印刷品)

Dynamic Behavior of Materials, Volume 1 = Proceedings of the 2017 Annual Conference on Experimental and Applied Mechanics / by: (書目-語言資料,印刷品)

Thermal Protection Modeling of Hypersonic Flying Apparatus by: (書目-語言資料,印刷品)

Modeling and Design of Flexible Pavements and Materials by: (書目-語言資料,印刷品)

Characterization of Minerals, Metals, and Materials 2018 by: (書目-語言資料,印刷品)

Structural Chemistry = Principles, Methods, and Case Studies / by: (書目-語言資料,印刷品)

Calcined Clays for Sustainable Concrete = Proceedings of the 2nd International Conference on Calcined Clays for Sustainable Concrete / by: (書目-語言資料,印刷品)

Composite Materials Engineering, Volume 1 = Fundamentals of Composite Materials / by: (書目-語言資料,印刷品)

Recycled Aggregate Concrete Structures by: (書目-語言資料,印刷品)

Nano/Micro-Structured Materials for Energy and Biomedical Applications = Latest Developments, Challenges and Future Directions / by: (書目-語言資料,印刷品)

Urban Wind Environment = Integrated Climate-Sensitive Planning and Design / by: (書目-語言資料,印刷品)

Creep and Hygrothermal Effects in Concrete Structures by: (書目-語言資料,印刷品)

Living Under the Threat of Earthquakes = Short and Long-term Management of Earthquake Risks and Damage Prevention in Nepal / by: (書目-語言資料,印刷品)

The Ageing of Materials and Structures = Towards Scientific Solutions for the Ageing of Our Assets / by: (書目-語言資料,印刷品)

Multi-layer Pavement System under Blast Load by: (書目-語言資料,印刷品)

Vibration Control of Active Structures = An Introduction / by: (書目-語言資料,印刷品)

Design of Structural Elements with Tropical Hardwoods by: (書目-語言資料,印刷品)

Plasticity and Fracture by: (書目-語言資料,印刷品)

Building Performance Evaluation = From Delivery Process to Life Cycle Phases / by: (書目-語言資料,印刷品)

Service Life and Durability of Reinforced Concrete Structures = Selected Papers of the 8th International RILEM PhD Workshop held in Marne-la-Vallée, France, September 26-27, 2016 / by: (書目-語言資料,印刷品)

Behavior of Unbounded Post- tensioned Masonry Walls by: (書目-語言資料,印刷品)

A New Generation Material Graphene: Applications in Water Technology by: (書目-語言資料,印刷品)

Machining Difficult-to-Cut Materials = Basic Principles and Challenges / by: (書目-語言資料,印刷品)

Short Fibre Reinforced Cementitious Composites and Ceramics by: (書目-語言資料,印刷品)

Electronic Waste and Printed Circuit Board Recycling Technologies by: (書目-語言資料,印刷品)

Thermal Stresses—Advanced Theory and Applications by: (書目-語言資料,印刷品)

Impact Behavior and Pedestrian Protection of Automotive Laminated Windshield = Theories, Experiments and Numerical Simulations / by: (書目-語言資料,印刷品)

Structural Performance of Masonry Elements = Mortar Coating Layers Influence / by: (書目-語言資料,印刷品)

Proceedings of the 7th International Conference on Fracture Fatigue and Wear = FFW 2018, 9-10 July 2018, Ghent University, Belgium / by: (書目-語言資料,印刷品)

Mechanical Properties of Silicon Based Compounds: Silicides by: (書目-語言資料,印刷品)

Environmentally Friendly Zeolites = Synthesis and Source Materials / by: (書目-語言資料,印刷品)

Adhesion in Layered Cement Composites by: (書目-語言資料,印刷品)

Integrative Approach to Comprehensive Building Renovations by: (書目-語言資料,印刷品)

Light Weighting for Defense, Aerospace, and Transportation by: (書目-語言資料,印刷品)

First RILEM International Conference on Concrete and Digital Fabrication – Digital Concrete 2018 by: (書目-語言資料,印刷品)

Antipodal Vivaldi Antennas for Microwave Imaging of Construction Materials and Structures by: (書目-語言資料,印刷品)

Optical Fiber Sensing and Structural Health Monitoring Technology by: (書目-語言資料,印刷品)

Mesoscale Models = From Micro-Physics to Macro-Interpretation / by: (書目-語言資料,印刷品)

Dynamic Behavior of Materials, Volume 1 = Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics / by: (書目-語言資料,印刷品)

Dynamic Stability and Bifurcation in Nonconservative Mechanics by: (書目-語言資料,印刷品)

Computational and Manufacturing Strategies = Experimental Expressions of Wood Capabilities / by: (書目-語言資料,印刷品)

Rare Metal Technology 2019 by: (書目-語言資料,印刷品)

Thin-walled Laminated Structures = Buckling, Vibrations and Their Suppression / by: (書目-語言資料,印刷品)

Design of Reinforced Concrete Silo Groups by: (書目-語言資料,印刷品)

Environmental Water Footprints = Energy and Building Sectors / by: (書目-語言資料,印刷品)

Design of Steel Structures to Eurocodes by: (書目-語言資料,印刷品)

Advanced Materials = Proceedings of the International Conference on “Physics and Mechanics of New Materials and Their Applications”, PHENMA 2018 / by: (書目-語言資料,印刷品)

Physical Properties and Behaviour of High-Performance Concrete at High Temperature = State-of-the-Art Report of the RILEM Technical Committee 227-HPB / by: (書目-語言資料,印刷品)

Dense and Green Building Typologies = Design Perspectives / by: (書目-語言資料,印刷品)

3D Printing and Additive Manufacturing Technologies by: (書目-語言資料,印刷品)

Handbook on Concrete Block Paving by: (書目-語言資料,印刷品)

Bio-based Building Skin by: (書目-語言資料,印刷品)

Concrete Construction = Practical Problems and Solutions / by: (書目-語言資料,印刷品)

Simulation and Experiments of Material-Oriented Ultra-Precision Machining by: (書目-語言資料,印刷品)

Proceedings of the Second International Conference on Theoretical, Applied and Experimental Mechanics by: (書目-語言資料,印刷品)

Fracture, Fatigue, Failure and Damage Evolution, Volume 6 = Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics / by: (書目-語言資料,印刷品)

Polypropylene Handbook = Morphology, Blends and Composites / by: (書目-語言資料,印刷品)

Museum Technology and Architecture by: (書目-語言資料,印刷品)

Glassy Nuclei in Amorphous Ice = Novel Evidence for the Two-Liquids Nature of Water / by: (書目-語言資料,印刷品)

Architectured Materials in Nature and Engineering = Archimats / by: (書目-語言資料,印刷品)

Structural Materials = Properties and Selection / by: (書目-語言資料,印刷品)

Modelling of Concrete Behaviour at High Temperature = State-of-the-Art Report of the RILEM Technical Committee 227-HPB / by: (書目-語言資料,印刷品)

Drying Kinetics in Building Materials and Components = The Interface Influence / by: (書目-語言資料,印刷品)

Enzymatic Polymerization towards Green Polymer Chemistry by: (書目-語言資料,印刷品)

Eurocode 2 Design Data for Reinforced Concrete Columns by: (書目-語言資料,印刷品)

Advances in Materials and Metallurgy = Select Proceedings of ICEMMM 2018 / by: (書目-語言資料,印刷品)

Incremental Forming as a Rapid Tooling Process by: (書目-語言資料,印刷品)

Marine Biological Materials of Invertebrate Origin by: (書目-語言資料,印刷品)

Nocturnal Cooling Technology for Building Applications by: (書目-語言資料,印刷品)

Metallic Microlattice Structures = Manufacture, Materials and Application / by: (書目-語言資料,印刷品)

Prestressed Concrete = Building, Design, and Construction / by: (書目-語言資料,印刷品)

Strukturelle Phasenanalyse von chemischen Prozessadditiven in der Silikat-Industrie = Untersuchung der Wechselwirkung von Alkali-Wassergläsern mit Aluminium-Tetrametaphosphat / by: (書目-語言資料,印刷品)

Characterization of Minerals, Metals, and Materials 2019 by: (書目-語言資料,印刷品)

Fatigue Crack Growth Failure and Lifing Analyses for Metallic Aircraft Structures and Components by: (書目-語言資料,印刷品)

Systematic Approach of Characterisation and Behaviour of Recycled Aggregate Concrete by: (書目-語言資料,印刷品)

Historic Mortars = Advances in Research and Practical Conservation / by: (書目-語言資料,印刷品)

Dense and Green Building Typologies = Research, Policy and Practice Perspectives / by: (書目-語言資料,印刷品)

Active Origami = Modeling, Design, and Applications / by: (書目-語言資料,印刷品)

Advanced Manufacturing Processes = Selected Papers from the Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2019), September 10-13, 2019, Odessa, Ukraine / by: (書目-語言資料,印刷品)

Mechanics of Wood Machining by: (書目-語言資料,印刷品)

Engineering Design Applications III = Structures, Materials and Processes / by: (書目-語言資料,印刷品)

Plasticity, Damage and Fracture in Advanced Materials by: (書目-語言資料,印刷品)

The Science and Engineering of Mechanical Shock by: (書目-語言資料,印刷品)

ACMSM25 = Proceedings of the 25th Australasian Conference on Mechanics of Structures and Materials / by: (書目-語言資料,印刷品)

Proceedings of the International Conference of Sustainable Production and Use of Cement and Concrete = ICSPCC 2019 / by: (書目-語言資料,印刷品)

Rheology and Processing of Construction Materials = RheoCon2 & SCC9 / by: (書目-語言資料,印刷品)

Magnesium Technology 2020 by: (書目-語言資料,印刷品)

Advances in Additive Manufacturing and Joining = Proceedings of AIMTDR 2018 / by: (書目-語言資料,印刷品)

Second RILEM International Conference on Concrete and Digital Fabrication = Digital Concrete 2020 / by: (書目-語言資料,印刷品)

Advances in Thick Section Composite and Sandwich Structures = An Anthology of ONR-sponsored Research / by: (書目-語言資料,印刷品)

Refractories for the Cement Industry by: (書目-語言資料,印刷品)

Geotechnics for Sustainable Infrastructure Development by: (書目-語言資料,印刷品)

Proceedings of Italian Concrete Days 2018 by: (書目-語言資料,印刷品)

Basic Concepts of Iron and Steel Making by: (書目-語言資料,印刷品)

Aerospace Alloys by: (書目-語言資料,印刷品)

Terminal Ballistics by: (書目-語言資料,印刷品)

Advanced Materials = Proceedings of the International Conference on “Physics and Mechanics of New Materials and Their Applications”, PHENMA 2019 / by: (書目-語言資料,印刷品)

Proceedings of the 9th International Conference on Maintenance and Rehabilitation of Pavements—Mairepav9 by: (書目-語言資料,印刷品)

A Review on Dental Materials by: (書目-語言資料,印刷品)

Polymer Engineering 1 = Einführung, Synthese, Eigenschaften / by: (書目-語言資料,印刷品)

Leichtbau durch Funktionsintegration by: (書目-語言資料,印刷品)

Interface Influence on Moisture Transport in Building Components = The Wetting Process / by: (書目-語言資料,印刷品)

Troubleshooting Finite-Element Modeling with Abaqus = With Application in Structural Engineering Analysis / by: (書目-語言資料,印刷品)

ICAF 2019 – Structural Integrity in the Age of Additive Manufacturing = Proceedings of the 30th Symposium of the International Committee on Aeronautical Fatigue, June 2-7, 2019, Krakow, Poland / by: (書目-語言資料,印刷品)

Leather and Footwear Sustainability = Manufacturing, Supply Chain, and Product Level Issues / by: (書目-語言資料,印刷品)

Betriebsfestigkeit = Bauteile sicher auslegen! / by: (書目-語言資料,印刷品)

Shape Memory Alloys for Seismic Resilience by: (書目-語言資料,印刷品)

A Virtual Testing Approach for Honeycomb Sandwich Panel Joints in Aircraft Interior by: (書目-語言資料,印刷品)

Operations and Basic Processes in Ironmaking by: (書目-語言資料,印刷品)

Progress in Digital and Physical Manufacturing = Proceedings of ProDPM'19 / by: (書目-語言資料,印刷品)

Molecular Simulation on Cement-Based Materials = From Theory to Application / by: (書目-語言資料,印刷品)

Theoretical Thermotics = Transformation Thermotics and Extended Theories for Thermal Metamaterials / by: (書目-語言資料,印刷品)

Advances in Structures, Systems and Materials = Select Proceedings of ERCAM 2019 / by: (書目-語言資料,印刷品)

Mechanics of Strain Gradient Materials by: (書目-語言資料,印刷品)

Developments and Novel Approaches in Biomechanics and Metamaterials by: (書目-語言資料,印刷品)

External Sulphate Attack – Field Aspects and Lab Tests = RILEM Final Workshop of TC 251-SRT (Madrid - SPAIN, 2018) / by: (書目-語言資料,印刷品)

Challenges in Mechanics of Time Dependent Materials, Fracture, Fatigue, Failure and Damage Evolution, Volume 2 = Proceedings of the 2019 Annual Conference on Experimental and Applied Mechanics / by: (書目-語言資料,印刷品)

Nonlinear Structures and Systems, Volume 1 = Proceedings of the 37th IMAC, A Conference and Exposition on Structural Dynamics 2019 / by: (書目-語言資料,印刷品)

Prozesstechnologie zur Herstellung von FVK-Metall-Hybriden = Ergebnisse aus dem BMBF-Verbundprojekt ProVorPlus / by: (書目-語言資料,印刷品)

Cotton Science and Processing Technology = Gene, Ginning, Garment and Green Recycling / by: (書目-語言資料,印刷品)

Advances in Industrial Design = Proceedings of the AHFE 2020 Virtual Conferences on Design for Inclusion, Affective and Pleasurable Design, Interdisciplinary Practice in Industrial Design, Kansei Engineering, and Human Factors for Apparel and Textile Engineering, July 16–20, 2020, USA / by: (書目-語言資料,印刷品)

Mechanical Behavior and Fracture of Engineering Materials by: (書目-語言資料,印刷品)

Gulf Conference on Sustainable Built Environment by: (書目-語言資料,印刷品)

Deformation Processes in TRIP/TWIP Steels = In-Situ Characterization Techniques / by: (書目-語言資料,印刷品)

In-situ Mechanics of Materials = Principles,Tools, Techniques and Applications / by: (書目-語言資料,印刷品)

Handbook of Damage Mechanics = Nano to Macro Scale for Materials and Structures / by: (書目-語言資料,印刷品)

CIGOS 2019, Innovation for Sustainable Infrastructure = Proceedings of the 5th International Conference on Geotechnics, Civil Engineering Works and Structures / by: (書目-語言資料,印刷品)

Proceedings of ARCH 2019 = 9th International Conference on Arch Bridges / by: (書目-語言資料,印刷品)

Integrierte Produktentwicklung mit Faser-Kunststoff-Verbunden by: (書目-語言資料,印刷品)

Study of New Ternary Rare-Earth Intermetallic Germanides with Polar Covalent Bonding = Beyond the Zintl Picture / by: (書目-語言資料,印刷品)

Sustainable Materials in Building Construction by: (書目-語言資料,印刷品)

WCFS2019 = Proceedings of the World Conference on Floating Solutions / by: (書目-語言資料,印刷品)

Advances in Structural Engineering = Select Proceedings of FACE 2019 / by: (書目-語言資料,印刷品)

ICACE 2019 = Selected Articles from the International Conference on Architecture and Civil Engineering / by: (書目-語言資料,印刷品)

Structural Characterisation of Natural and Industrial Porous Materials: A Manual by: (書目-語言資料,印刷品)

Handbook of Advanced Ceramics and Composites = Defense, Security, Aerospace and Energy Applications / by: (書目-語言資料,印刷品)

Acoustic And Non-Acoustic Performance Coal Bottom Ash Concrete by: (書目-語言資料,印刷品)

Durability and Sustainability of Concrete = Case Studies for Concrete exposures / by: (書目-語言資料,印刷品)

Chloride-Induced Steel Corrosion in Concrete Under Service Loads by: (書目-語言資料,印刷品)

Women in Aerospace Materials = Advancements and Perspectives of Emerging Technologies / by: (書目-語言資料,印刷品)

Mechanics of Metamaterials with Negative Parameters by: (書目-語言資料,印刷品)

Nonlinear Wave Dynamics of Materials and Structures by: (書目-語言資料,印刷品)

Conceptual Theories in Structural Dynamics by: (書目-語言資料,印刷品)

Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites = Design of Tough, Transformation-Strengthened Composites and Structures / by: (書目-語言資料,印刷品)

Polymer Engineering 3 = Werkstoff- und Bauteilprüfung, Recycling, Entwicklung / by: (書目-語言資料,印刷品)

Building Pathology, Durability and Service Life by: (書目-語言資料,印刷品)

Fracture of Materials Under Compression Along Cracks by: (書目-語言資料,印刷品)

ICSCEA 2019 = Proceedings of the International Conference on Sustainable Civil Engineering and Architecture / by: (書目-語言資料,印刷品)

Polymer Engineering 2 = Verarbeitung, Oberflächentechnologie, Gestaltung / by: (書目-語言資料,印刷品)

An Insight Into Metal Based Foams = Processing, Properties and Applications / by: (書目-語言資料,印刷品)

Developments and Novel Approaches in Nonlinear Solid Body Mechanics by: (書目-語言資料,印刷品)

Microbially Induced Corrosion and its Mitigation by: (書目-語言資料,印刷品)

Kontinuierliche kraftflussgerechte Textiltechnologien für Leichtbaustrukturen in Großserie = Ergebnisse aus dem BMBF-Verbundprojekt KonText / by: (書目-語言資料,印刷品)

Refractories for the Chemical Industries by: (書目-語言資料,印刷品)

Superalloys 2020 = Proceedings of the 14th International Symposium on Superalloys / by: (書目-語言資料,印刷品)

Handbook of Advanced Ceramics and Composites = Defense, Security, Aerospace and Energy Applications / by: (書目-語言資料,印刷品)

Geopolymer and Geopolymer Matrix Composites by: (書目-語言資料,印刷品)

Advances in Lightweight Materials and Structures = Select Proceedings of ICALMS 2020 / by: (書目-語言資料,印刷品)

Engineering of Thermoplastic Elastomer with Graphene and Other Anisotropic Nanofillers by: (書目-語言資料,印刷品)

Hygrothermal Behaviour and Building Pathologies by: (書目-語言資料,印刷品)

Recent Advances in Layered Materials and Structures by: (書目-語言資料,印刷品)

Forming the Future = Proceedings of the 13th International Conference on the Technology of Plasticity / by: (書目-語言資料,印刷品)

Hemp and Sustainability by: (書目-語言資料,印刷品)

Light Metals 2021 = 50th Anniversary Edition / by: (書目-語言資料,印刷品)

TMS 2021 150th Annual Meeting & Exhibition Supplemental Proceedings by: (書目-語言資料,印刷品)

Future Space-Transport-System Components under High Thermal and Mechanical Loads = Results from the DFG Collaborative Research Center TRR40 / by: (書目-語言資料,印刷品)

Post-industrial Robotics = Exploring Informed Architecture / by: (書目-語言資料,印刷品)

Vegetable Fiber Composites and their Technological Applications by: (書目-語言資料,印刷品)

Structure and Properties of High-Entropy Alloys by: (書目-語言資料,印刷品)

Limestone Mining in India by: (書目-語言資料,印刷品)

Transport Processes and Separation Technologies by: (書目-語言資料,印刷品)

Structural and Thermal Analyses of Deepwater Pipes by: (書目-語言資料,印刷品)

Schienenfehler 1 = Beanspruchung und Schädigung von Eisenbahnschienen / by: (書目-語言資料,印刷品)

Amorphous Chalcogenide Semiconductors and Related Materials by: (書目-語言資料,印刷品)

Proceedings of the 3rd RILEM Spring Convention and Conference (RSCC 2020) = Volume 2: New Materials and Structures for Ultra-durability / by: (書目-語言資料,印刷品)

ICSDEMS 2019 = Proceedings of the International Conference on Sustainable Design, Engineering, Management and Sciences / by: (書目-語言資料,印刷品)

Advances in Material Science and Engineering = Selected articles from ICMMPE 2020 / by: (書目-語言資料,印刷品)

Tribology of Polymer and Polymer Composites for Industry 4.0 by: (書目-語言資料,印刷品)

Bacterial Cellulose = Sustainable Material for Textiles / by: (書目-語言資料,印刷品)

Wood Additive Technologies = Application of Active Design Optioneering / by: (書目-語言資料,印刷品)

Proceedings of the 3rd RILEM Spring Convention and Conference (RSCC 2020) = Volume 4: Shift to a Circular Economy / by: (書目-語言資料,印刷品)

Sustainable Design in Textiles and Fashion by: (書目-語言資料,印刷品)

Advances in Mechanical Engineering, Materials and Mechanics = Selected contributions from the 7th International Conference on Advances in Mechanical Engineering and Mechanics, ICAMEM 2019, December 16-18, 2019, Hammamet, Tunisia / by: (書目-語言資料,印刷品)

3rd International Conference on Innovative Technologies for Clean and Sustainable Development = ITCSD 2020 / by: (書目-語言資料,印刷品)

Enhanced Material, Parts Optimization and Process Intensification = Proceedings of the First International Joint Conference on Enhanced Material and Part Optimization and Process Intensification, EMPOrIA 2020, May 19-20, 2020, Aachen, Germany / by: (書目-語言資料,印刷品)

Practical Approach to 3D Weaving by: (書目-語言資料,印刷品)

Design and Crosstalk Analysis in Carbon Nanotube Interconnects by: (書目-語言資料,印刷品)

Advances in Hydrogen Embrittlement Study by: (書目-語言資料,印刷品)

Ancient Glass of South Asia = Archaeology, Ethnography and Global Connections / by: (書目-語言資料,印刷品)

Processing and Characterization of Materials = Select Proceedings of CPCM 2020 / by: (書目-語言資料,印刷品)

Acting Principles of Nano-Scaled Matrix Additives for Composite Structures by: (書目-語言資料,印刷品)

Introduction to Geometrically Nonlinear Continuum Dislocation Theory = FE Implementation and Application on Subgrain Formation in Cubic Single Crystals Under Large Strains / by: (書目-語言資料,印刷品)

Energy-Sustainable Advanced Materials by: (書目-語言資料,印刷品)

Case Studies in Building Rehabilitation by: (書目-語言資料,印刷品)

Fibre Reinforced Concrete: Improvements and Innovations = RILEM-fib International Symposium on FRC (BEFIB) in 2020 / by: (書目-語言資料,印刷品)

Data Technology in Materials Modelling by: (書目-語言資料,印刷品)

Concrete-Filled Double Skin Steel Tubular Column with Hybrid Fibre Reinforced Polymer = Post Fire Repair / by: (書目-語言資料,印刷品)

Novel Materials for Dye-containing Wastewater Treatment by: (書目-語言資料,印刷品)

Advances in Mechanical Engineering = Selected Contributions from the Conference “Modern Engineering: Science and Education”, Saint Petersburg, Russia, June 2020 / by: (書目-語言資料,印刷品)

Advanced Removal Techniques for Dye-containing Wastewaters by: (書目-語言資料,印刷品)

Operations and Basic Processes in Steelmaking by: (書目-語言資料,印刷品)

Proceedings of the 8th International Ergonomics Conference = ERGONOMICS 2020 / by: (書目-語言資料,印刷品)

Flax-TRM Composite Systems for Strengthening of Masonry = From Material Identification to Structural Behavior / by: (書目-語言資料,印刷品)

Advances in Textile Waste Water Treatments by: (書目-語言資料,印刷品)

Wearable Antennas and Body Centric Communication = Present and Future / by: (書目-語言資料,印刷品)

Recent Advances in Computational Mechanics and Simulations = Volume-I: Materials to Structures / by: (書目-語言資料,印刷品)

Fracture, Fatigue, Failure and Damage Evolution , Volume 3 = Proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics / by: (書目-語言資料,印刷品)

Dynamic Substructures, Volume 4 = Proceedings of the 38th IMAC, A Conference and Exposition on Structural Dynamics 2020 / by: (書目-語言資料,印刷品)

Case Studies in Building Constructions by: (書目-語言資料,印刷品)

Structural Analysis of Concrete-Filled Double Steel Tubes by: (書目-語言資料,印刷品)

Diagnosis & Prognosis of AAR Affected Structures = State-of-the-Art Report of the RILEM Technical Committee 259-ISR / by: (書目-語言資料,印刷品)

Recent Advances in Structural Engineering = Select Proceedings of NCRASE 2020 / by: (書目-語言資料,印刷品)

Initiation and Flame Propagation in Combustion of Gases and Pyrophoric Metal Nanostructures by: (書目-語言資料,印刷品)

3D Printing Architecture = Workflows, Applications, and Trends / by: (書目-語言資料,印刷品)

Practical Design of Ships and Other Floating Structures = Proceedings of the 14th International Symposium, PRADS 2019, September 22-26, 2019, Yokohama, Japan- Volume II / by: (書目-語言資料,印刷品)

Practical Design of Ships and Other Floating Structures = Proceedings of the 14th International Symposium, PRADS 2019, September 22-26, 2019, Yokohama, Japan- Volume III / by: (書目-語言資料,印刷品)

Practical Design of Ships and Other Floating Structures = Proceedings of the 14th International Symposium, PRADS 2019, September 22-26, 2019, Yokohama, Japan- Volume I / by: (書目-語言資料,印刷品)

Principles of Cement and Concrete Composites by: (書目-語言資料,印刷品)

Challenges in Mechanics of Time Dependent Materials, Volume 2 = Proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics / by: (書目-語言資料,印刷品)

Proceedings of 1st International Conference on Structural Damage Modelling and Assessment = SDMA 2020, 4-5 August 2020, Ghent University, Belgium / by: (書目-語言資料,印刷品)

Sustainable Fashion and Textiles in Latin America by: (書目-語言資料,印刷品)

Materials Research and Applications = Select Papers from JCH8-2019 / by: (書目-語言資料,印刷品)

Nonlinear Analysis of Thin-Walled Smart Structures by: (書目-語言資料,印刷品)

Machining and Machinability of Fiber Reinforced Polymer Composites by: (書目-語言資料,印刷品)

Proceedings of the 3rd RILEM Spring Convention and Conference (RSCC2020) = Volume 1: Strategies for a Resilient Built Environment / by: (書目-語言資料,印刷品)

Innovations and Technologies in Construction = Selected Papers of BUILDINTECH BIT 2020 / by: (書目-語言資料,印刷品)

Smart Technologies for Sustainable Development = Select Proceedings of SMTS 2019 / by: (書目-語言資料,印刷品)

EASEC16 = Proceedings of The 16th East Asian-Pacific Conference on Structural Engineering and Construction, 2019 / by: (書目-語言資料,印刷品)

Carbide in Special Steel = Formation Mechanism and Control Technology / by: (書目-語言資料,印刷品)

Mechanics of Composite, Hybrid and Multifunctional Materials , Volume 6 = Proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics / by: (書目-語言資料,印刷品)

Degradation Theory of Long Term Operated Materials and Structures by: (書目-語言資料,印刷品)

Model Fire in a Two-Storey Timber Building by: (書目-語言資料,印刷品)

Proceedings of the 8th International Conference on Fracture, Fatigue and Wear = FFW 2020, August 26–27 2020 / by: (書目-語言資料,印刷品)

Formgedächtnistechnik = Entwickeln, Testen und Anwenden / by: (書目-語言資料,印刷品)

Recent Trends in Traditional and Technical Textiles = Select Proceedings of ICETT 2019 / by: (書目-語言資料,印刷品)

Advances in Construction Materials and Structures = Select Proceedings of ICON 2019 / by: (書目-語言資料,印刷品)

Design and Manufacture of Fibre-Reinforced Composites by: (書目-語言資料,印刷品)

Eco-Friendly Adhesives for Wood and Natural Fiber Composites = Characterization, Fabrication and Applications / by: (書目-語言資料,印刷品)

Surface Processing of Light Alloys Subject to Concentrated Energy Flows by: (書目-語言資料,印刷品)

Recommender Systems in Fashion and Retail by: (書目-語言資料,印刷品)

Analytical or Semi-analytical Solutions of Functionally Graded Material Structures by: (書目-語言資料,印刷品)

Handbook of Nanocomposite Supercapacitor Materials III = Selection / by: (書目-語言資料,印刷品)

Circular Economy = Assessment and Case Studies / by: (書目-語言資料,印刷品)

Advanced Manufacturing Processes II = Selected Papers from the 2nd Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2020), September 8-11, 2020, Odessa, Ukraine / by: (書目-語言資料,印刷品)

Special Topics in Structural Dynamics & Experimental Techniques, Volume 5 = Proceedings of the 38th IMAC, A Conference and Exposition on Structural Dynamics 2020 / by: (書目-語言資料,印刷品)

Foundations of Classical Laminate Theory by: (書目-語言資料,印刷品)

Nanotechnology in Edible Food Packaging = Food Preservation Practices for a Sustainable Future / by: (書目-語言資料,印刷品)

Research and Development of Deck Bridges by: (書目-語言資料,印刷品)

Chemie der Werkstoffe by: (書目-語言資料,印刷品)

Comprehensive Utilization of Magnesium Slag by Pidgeon Process by: (書目-語言資料,印刷品)

Advances in Civil Engineering Materials = Selected Articles from the International Conference on Architecture and Civil Engineering (ICACE2020) / by: (書目-語言資料,印刷品)

Friction Stir Welding and Processing XI by: (書目-語言資料,印刷品)

Rare Metal Technology 2021 by: (書目-語言資料,印刷品)

Metal-Matrix Composites = Advances in Analysis, Measurement, and Observations / by: (書目-語言資料,印刷品)

Reinforcement of Timber Elements in Existing Structures = State-of-the-Art Report of the RILEM TC 245-RTE / by: (書目-語言資料,印刷品)

Ni-Co 2021: The 5th International Symposium on Nickel and Cobalt by: (書目-語言資料,印刷品)

Magnesium Technology 2021 by: (書目-語言資料,印刷品)

Manufacturing Automotive Components from Sustainable Natural Fiber Composites by: (書目-語言資料,印刷品)

Plates = Theories and Applications / by: (書目-語言資料,印刷品)

Nanomaterials and Nanocomposites for Environmental Remediation by: (書目-語言資料,印刷品)

Physics and Mechanics of New Materials and Their Applications = Proceedings of the International Conference PHENMA 2020 / by: (書目-語言資料,印刷品)

Schienenfehler 2 = Bruchmechanik rissartiger Schienenfehler / by: (書目-語言資料,印刷品)

International RILEM Conference on Early-Age and Long-Term Cracking in RC Structures = CRC 2021 / by: (書目-語言資料,印刷品)

Sandwich Structures: Theory and Responses by: (書目-語言資料,印刷品)

Magnesium 2021 = Proceedings of the 12th International Conference on Magnesium Alloys and Their Applications / by: (書目-語言資料,印刷品)

Recent Developments in Plastic Recycling by: (書目-語言資料,印刷品)

Fundamentals of Dimensional Analysis = Theory and Applications in Metallurgy / by: (書目-語言資料,印刷品)

Advances in Acoustics and Vibration III = Proceedings of the Third International Conference on Acoustics and Vibration (ICAV2021), March 15-16, 2021 / by: (書目-語言資料,印刷品)

Proceedings of MEACM 2020 = Mechanical Engineering and Applied Composite Materials / by: (書目-語言資料,印刷品)

Emerging Trends of Advanced Composite Materials in Structural Applications by: (書目-語言資料,印刷品)

Adhesive Bonding of Aircraft Composite Structures = Non-destructive Testing and Quality Assurance Concepts / by: (書目-語言資料,印刷品)

Cotton and Flax Fibre-Reinforced Geopolymer Composites = Synthesis, Properties and Applications / by: (書目-語言資料,印刷品)

Prozessgerechte Topologieoptimierung für die Additive Fertigung by: (書目-語言資料,印刷品)

Thermoplastische, rollgeformte Profile in Hybridbauweise 2 - TroPHy2 = Forschungsberichte aus dem Forschungscampus Open Hybrid LabFactory / by: (書目-語言資料,印刷品)

Damage and Fracture of Ceramic-Matrix Composites Under Stochastic Loading by: (書目-語言資料,印刷品)

Nanocomposites as Next-Generation Optical Materials = Fundamentals, Design and Advanced Applications / by: (書目-語言資料,印刷品)

Handbook of Fullerene Science and Technology by: (書目-語言資料,印刷品)

Gradient Microstructure in Laser Shock Peened Materials = Fundamentals and Applications / by: (書目-語言資料,印刷品)

Next Generation Materials and Processing Technologies = Select Proceedings of RDMPMC 2020 / by: (書目-語言資料,印刷品)

Proceedings of the Sustainable Concrete Materials and Structures in Construction 2020 = Towards Sustainable Green Concrete / by: (書目-語言資料,印刷品)

Diagnostic of Concrete Samples Affected by Internal Swelling Reactions by: (書目-語言資料,印刷品)

Round-Robin Test on Creep Behaviour in Cracked Sections of FRC: Experimental Program, Results and Database Analysis = State-of-the-Art Report of the RILEM TC 261-CCF / by: (書目-語言資料,印刷品)

Civil Structural Health Monitoring = Proceedings of CSHM-8 Workshop / by: (書目-語言資料,印刷品)

Handloom Sustainability and Culture = Artisanship and Value Addition / by: (書目-語言資料,印刷品)

Flexible Forming for Fluid Architecture by: (書目-語言資料,印刷品)

International Handbook of Structural Fire Engineering by: (書目-語言資料,印刷品)

Fluid Mechanics Fundamentals of Hydrocyclones and Its Applications in the Mining Industry by: (書目-語言資料,印刷品)

Chemically Deposited Nanocrystalline Metal Oxide Thin Films = Synthesis, Characterizations, and Applications / by: (書目-語言資料,印刷品)

Advances in Mechanical Engineering = Select Proceedings of CAMSE 2020 / by: (書目-語言資料,印刷品)

Structural Characterization and Seismic Retrofitting of Adobe Constructions = Experimental and Numerical Developments / by: (書目-語言資料,印刷品)

Structural Materials = Behavior, Testing and Evaluation / by: (書目-語言資料,印刷品)

Ten Materials That Shaped Our World by: (書目-語言資料,印刷品)

Ceramics, Glass and Glass-Ceramics = From Early Manufacturing Steps Towards Modern Frontiers / by: (書目-語言資料,印刷品)

Handloom Sustainability and Culture = Product Development, Design and Environmental Aspects / by: (書目-語言資料,印刷品)

Properties of Self-Compacting Concrete with Coal Bottom Ash Under Aggressive Environments by: (書目-語言資料,印刷品)

Glasfasern by: (書目-語言資料,印刷品)

Functionalized Two-Dimensional Black Phosphorus and Polymer Nanocomposites as Flame Retardant = Preparation and Properties / by: (書目-語言資料,印刷品)

Fundamentals of Materials Science = The Microstructure–Property Relationship Using Metals as Model Systems / by: (書目-語言資料,印刷品)

Acoustic Emission = Fracture Detection in Structural Materials / by: (書目-語言資料,印刷品)

Nickel-saving Type High Nitrogen Austenitic Stainless Steel by: (書目-語言資料,印刷品)

Advanced Multicomponent Alloys = From Fundamentals to Applications / by: (書目-語言資料,印刷品)

Handbook of Fullerene Science and Technology by: (書目-語言資料,印刷品)

Plant Fiber Reinforced Composites by: (書目-語言資料,印刷品)

Proceedings of the 3rd RILEM Spring Convention and Conference (RSCC 2020) = Volume 3: Service Life Extension of Existing Structures / by: (書目-語言資料,印刷品)

Rubies and Implants = Aluminium oxide and Its Diverse Facets / by: (書目-語言資料,印刷品)

Advances in Solid and Fracture Mechanics = A Liber Amicorum to Celebrate the Birthday of Nikita Morozov / by: (書目-語言資料,印刷品)

Fibre Reinforced Concrete: Improvements and Innovations II = X RILEM-fib International Symposium on Fibre Reinforced Concrete (BEFIB) 2021 / by: (書目-語言資料,印刷品)

Technological Advancements in Construction = Selected Papers / by: (書目-語言資料,印刷品)

Glasses and Glass-Ceramics = Advanced Processing and Applications / by: (書目-語言資料,印刷品)

Lectures Notes on Advanced Structured Materials by: (書目-語言資料,印刷品)

Masonry: Building Pathologies and Design by: (書目-語言資料,印刷品)

50+ Years of AIMETA = A Journey Through Theoretical and Applied Mechanics in Italy / by: (書目-語言資料,印刷品)

Reinforced Concrete with Worked Examples by: (書目-語言資料,印刷品)

Advances in Structural Mechanics and Applications = Proceedings of ASMA-2021 (Volume 3) / by: (書目-語言資料,印刷品)

Advances in Structural Mechanics and Applications = Proceedings of ASMA-2021 / by: (書目-語言資料,印刷品)

XXX Russian-Polish-Slovak Seminar Theoretical Foundation of Civil Engineering (RSP 2021) = Selected Papers / by: (書目-語言資料,印刷品)

Third RILEM International Conference on Concrete and Digital Fabrication = Digital Concrete 2022 / by: (書目-語言資料,印刷品)

Alloy 625 = Microstructure, Properties and Performance / by: (書目-語言資料,印刷品)

Advances in Civil Engineering Materials = Selected Articles from the International Conference on Architecture and Civil Engineering (ICACE2021) / by: (書目-語言資料,印刷品)

Materials Ageing in Light-Water Reactors = Handbook of Destructive Assays / by: (書目-語言資料,印刷品)

Sustainable Architecture and Building Environment = Proceedings of ICSDEMS 2020 / by: (書目-語言資料,印刷品)

Future Landscape of Structural Materials in India by: (書目-語言資料,印刷品)

Handbook of Epoxy/Fiber Composites by: (書目-語言資料,印刷品)

Betriebsfestigkeit = Bauteile sicher auslegen! / by: (書目-語言資料,印刷品)

Werkstoffkunde = Strukturen - grundlegende Eigenschaften / by: (書目-語言資料,印刷品)

WCFS2020 = Proceedings of the Second World Conference on Floating Solutions, Rotterdam / by: (書目-語言資料,印刷品)

Proceedings of Fourth International Conference on Inventive Material Science Applications = ICIMA 2021 / by: (書目-語言資料,印刷品)

Sustainable Light Concrete Structures by: (書目-語言資料,印刷品)

Advances in Structural Integrity = Structural Integrity Over Multiple Length Scales / by: (書目-語言資料,印刷品)

Proceedings of the 9th International Conference on Fracture, Fatigue and Wear = FFW 2021, August 2–3, Ghent University, Belgium / by: (書目-語言資料,印刷品)

CIGOS 2021, Emerging Technologies and Applications for Green Infrastructure = Proceedings of the 6th International Conference on Geotechnics, Civil Engineering and Structures / by: (書目-語言資料,印刷品)

Building Rehabilitation and Sustainable Construction by: (書目-語言資料,印刷品)

Fundamentals of Metal Joining = Processes, Mechanism and Performance / by: (書目-語言資料,印刷品)

Local and Nonlocal Micromechanics of Heterogeneous Materials by: (書目-語言資料,印刷品)

Advanced Manufacturing Processes III = Selected Papers from the 3rd Grabchenko’s International Conference on Advanced Manufacturing Processes (InterPartner-2021), September 7-10, 2021, Odessa, Ukraine / by: (書目-語言資料,印刷品)

Advanced Materials = An Introduction to Modern Materials Science / by: (書目-語言資料,印刷品)

Advances in Mechanical Engineering = Selected Contributions from the Conference “Modern Engineering: Science and Education”, Saint Petersburg, Russia, June 2021 / by: (書目-語言資料,印刷品)

Innovation in Construction = A Practical Guide to Transforming the Construction Industry / by: (書目-語言資料,印刷品)

Testing and Characterisation of Earth-based Building Materials and Elements = State-of-the-Art Report of the RILEM TC 274-TCE / by: (書目-語言資料,印刷品)

Positive Energy Buildings = Concepts, Challenges and Opportunities / by: (書目-語言資料,印刷品)

10th International Conference on FRP Composites in Civil Engineering = Proceedings of CICE 2020/2021 / by: (書目-語言資料,印刷品)

Advances in Polymeric Eco-Composites and Eco-Nanocomposites = Synthesis, Properties, and Applications / by: (書目-語言資料,印刷品)

Advancement in Materials, Manufacturing and Energy Engineering, Vol. I = Select Proceedings of ICAMME 2021 / by: (書目-語言資料,印刷品)

Protection of Historical Constructions = Proceedings of PROHITECH 2021 / by: (書目-語言資料,印刷品)

Proceedings of the 2nd International Conference on Structural Damage Modelling and Assessment = SDMA 2021, 4–5 August, Ghent University, Belgium / by: (書目-語言資料,印刷品)

Green Infrastructure = Materials and Applications / by: (書目-語言資料,印刷品)

Self-Healing Construction Materials = Fundamentals, Monitoring and Large Scale Applications / by: (書目-語言資料,印刷品)

Dynamic Behavior of Materials, Volume 1 = Proceedings of the 2021 Annual Conference and Exposition on Experimental and Applied Mechanics / by: (書目-語言資料,印刷品)

Nondestructive Testing and Evaluation of Fiber-Reinforced Composite Structures by: (書目-語言資料,印刷品)

Polymer-Based Advanced Functional Materials for Energy and Environmental Applications by: (書目-語言資料,印刷品)

Design of Reinforced Concrete Sections Under Bending and Axial Forces = Tables and Charts According to EUROCODE 2 / by: (書目-語言資料,印刷品)

Engineered Cementitious Composites for Electrified Roadway in Megacities = A Comprehensive Study on Functional Performance / by: (書目-語言資料,印刷品)

Advancement in Materials Processing Technology = Select Proceedings of AMPT 2020 / by: (書目-語言資料,印刷品)

Micromechanics of Fiber-Reinforced Laminae by: (書目-語言資料,印刷品)

Digital Fabrication with Cement-Based Materials = State-of-the-Art Report of the RILEM TC 276-DFC / by: (書目-語言資料,印刷品)

Structural Integrity Cases in Mechanical and Civil Engineering by: (書目-語言資料,印刷品)

The Plaston Concept = Plastic Deformation in Structural Materials / by: (書目-語言資料,印刷品)

Conversion Coatings for Magnesium and its Alloys by: (書目-語言資料,印刷品)

Proceedings of the 7th International Conference on Architecture, Materials and Construction = ICAMC 2021 / by: (書目-語言資料,印刷品)

Electron Microscopy in Science and Engineering by: (書目-語言資料,印刷品)

Impact Behavior of Fibre Reinforced Laminates = Fundamentals of Low Velocity Impact and Related Literature on FRP / by: (書目-語言資料,印刷品)

Advanced Composites in Aerospace Engineering Applications by: (書目-語言資料,印刷品)

Fatigue and Fracture of Materials and Structures = Contributions from ICMFM XX and KKMP2021 / by: (書目-語言資料,印刷品)

Handbook of Damage Mechanics = Nano to Macro Scale for Materials and Structures / by: (書目-語言資料,印刷品)

Fibers = history, production, properties, market / by: (書目-語言資料,印刷品)

Stability and bifurcation of structures = statical and dynamical systems / by: (書目-語言資料,印刷品)

Valorisation of waste and secondary materials for roads = state-of-the-art report of the RILEM TC 279-WMR / by: (書目-語言資料,印刷品)

Clay composites = environmental applications / by: (書目-語言資料,印刷品)

Seismic vulnerability index assessment framework of RC structures by: (書目-語言資料,印刷品)

Structural analysis of plane frames = solved examples with force and displacement methods / by: (書目-語言資料,印刷品)

Experimental vibration analysis for civil engineering structures = EVACES 2023.. Volume 2 / by: (書目-語言資料,印刷品)

Proceedings of the Indian Structural Steel Conference 2020. = ISSC 2020 /. (Vol. 2) by: (書目-語言資料,印刷品)

Strand corrosion in prestressed concrete structures by: (書目-語言資料,印刷品)

Positron profilometry = probing material depths for enhanced understanding / by: (書目-語言資料,印刷品)

Springer handbook of aerogels by: (書目-語言資料,印刷品)

Materials and technologies for future advancement by: (書目-語言資料,印刷品)

Proceedings of the 62nd Conference of Metallurgists, COM 2023 by: (書目-語言資料,印刷品)

Structural design and controllable preparation of the function-directed crystalline materials by: (書目-語言資料,印刷品)

Green infrastructure = materials and sustainable management / by: (書目-語言資料,印刷品)

Molecular simulation investigations of property degradation in CFRP composite by: (書目-語言資料,印刷品)

Advances in civil engineering materials = selected articles from the 7th International Conference on Architecture and Civil Engineering (ICACE 2023), Putrajaya, Malaysia / by: (書目-語言資料,印刷品)

Proceedings of the 5th International Conference on Geotechnics for Sustainable Infrastructure Development = GEOTEC2023; 14-15 Dec; Hanoi, Vietnam / by: (書目-語言資料,印刷品)

Mechanical integrity and risk-based inspection of process equipment, piping and pipelines by: (書目-語言資料,印刷品)

The engineer's guide to materials = an applications-focused introduction to materials science / by: (書目-語言資料,印刷品)

Superalloys 2024 = proceedings of the 15th International Symposium on Superalloys / by: (書目-語言資料,印刷品)

Fourth RILEM International Conference on Concrete and Digital Fabrication = Digital Concrete 2024 / by: (書目-語言資料,印刷品)

Proceedings of the 26th Australasian Conference on the Mechanics of Structures and Materials = ACMSM26, 3-6 December 2023, Auckland, New Zealand / by: (書目-語言資料,印刷品)

Proceedings of the 2nd International Conference on Advances in Civil Infrastructure and Construction Materials (CICM 2023).. Volume 2 by: (書目-語言資料,印刷品)

Proceedings of the 2nd International Conference on Advances in Civil Infrastructure and Construction Materials (CICM 2023).. Volume 1 by: (書目-語言資料,印刷品)

Fracture behavior of nanocomposites and reinforced laminate structures by: (書目-語言資料,印刷品)

Processing and fabrication of advanced materials. = proceedings of the 29th International Conference on Processing and Fabrication of Advanced Materials (29th PFAM) September 6-8, 2023 /. Volume 3 by: (書目-語言資料,印刷品)

Nonlinear structures & systems. = proceedings of the 42nd IMAC, a conference and exposition on structural dynamics 2024 /. Vol. 1 by: (書目-語言資料,印刷品)

Recent developments in structural engineering. = select proceedings of 13th Structural Engineering Convention (SEC) /. Volume 4 by: (書目-語言資料,印刷品)

4th fib International Conference on Concrete Sustainability (ICCS2024).. Volume 2 by: (書目-語言資料,印刷品)

Refractory fundamentals in metallurgical practice by: (書目-語言資料,印刷品)

Embodied and operational carbon in buildings = strategies to decarbonize / by: (書目-語言資料,印刷品)

Shape memory alloys in civil engineering by: (書目-語言資料,印刷品)

Processing and fabrication of advanced materials. = proceedings of the 29th International Conference on Processing and Fabrication of Advanced Materials (29th PFAM) September 6-8, 2023 /. Volume 1 by: (書目-語言資料,印刷品)

Transforming construction: advances in fiber reinforced concrete = XI RILEM-fib International Symposium on Fiber Reinforced Concrete (BEFIB 2024) / by: (書目-語言資料,印刷品)

Dynamic environments testing. = proceedings of the 42nd IMAC, a Conference and Exposition on Structural Dynamics 2024 /. Vol. 7 by: (書目-語言資料,印刷品)

Proceedings of the 12th International Conference on Advanced Materials and Engineering Materials = ICAMEM 2023, 15-18 December, Bangkok, Thailand / by: (書目-語言資料,印刷品)