Materials Engineering.

Insight into designing biocompatible magnesium alloys and composites = processing, mechanical and corrosion characteristics / by: (書目-語言資料,印刷品)

A primer on the geometry of carbon nanotubes and their modifications by: (書目-語言資料,印刷品)

Design and analysis of reinforced fiber composites by: (書目-語言資料,印刷品)

Fluid flow and heat transfer in rotating porous media by: (書目-語言資料,印刷品)

Materials for energy infrastructure by: (書目-語言資料,印刷品)

Textile materials for lightweight constructions = technologies - methods - materials - properties / by: (書目-語言資料,印刷品)

Nanomaterials in extreme environments = fundamentals and applications / by: (書目-語言資料,印刷品)

Active terahertz metamaterial for biomedical applications by: (書目-語言資料,印刷品)

Mechanics of composite and multifunctional materials. = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /. Volume 7 by: (書目-語言資料,印刷品)

Smart Intelligent Aircraft Structures (SARISTU) = proceedings of the Final Project Conference / by: (書目-語言資料,印刷品)

Challenges in mechanics of time dependent materials. = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /. Volume 2 by: (書目-語言資料,印刷品)

Advancement of optical methods in experimental mechanics. = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics /. Volume 3 by: (書目-語言資料,印刷品)

Proceedings of the III Advanced Ceramics and Applications Conference by: (書目-語言資料,印刷品)

The automated design of materials far from equilibrium by: (書目-語言資料,印刷品)

Information science for materials discovery and design by: (書目-語言資料,印刷品)

Solid oxide fuel cell components = interfacial compatibility of SOFC glass seals / by: (書目-語言資料,印刷品)

Mechanothermodynamics by: (書目-語言資料,印刷品)

Silica aerogel composites = novel fabrication methods / by: (書目-語言資料,印刷品)

Nano and biotech based materials for energy building efficiency by: (Language materials, printed)

Biomaterials and medical devices = a perspective from an emerging country / by: (Language materials, printed)

Electromagnetic ultrasonic guided waves by: (Language materials, printed)

Handbook of bioceramics and biocomposites by: (Language materials, printed)

Peptide-mediated biomineralization by: (Language materials, printed)

Corrosion control and surface finishing = environmentally friendly approaches / by: (Language materials, printed)

Power systems grounding by: (Language materials, printed)

Generalized continua as models for classical and advanced materials by: (Language materials, printed)

Microstructure-property correlations for hard, superhard, and ultrahard materials by: (Language materials, printed)

Nanoclay reinforced polymer composites = natural fibre/nanoclay hybrid composites / by: (Language materials, printed)

Surface modifications and growth of titanium dioxide for photo-electrochemical water splitting by: (Language materials, printed)

Carbon nanoparticles and nanostructures by: (Language materials, printed)

Particulate composites = fundamentals and applications / by: (Language materials, printed)

Advances in nanocomposites = modeling, characterization and applications / by: (Language materials, printed)

Neural engineering = from advanced biomaterials to 3D fabrication techniques / by: (Language materials, printed)

Self-healing materials by: (Language materials, printed)

Electromechanically active polymers = a concise reference / by: (Language materials, printed)

Refractive indices of solids by: (Language materials, printed)

Nanoclay reinforced polymer composites = nanocomposites and bionanocomposites / by: (Language materials, printed)

Physics and mechanics of primary well cementing by: (Language materials, printed)

Phosphors, up conversion nano particles, quantum dots and their applications.. Volume 2 by: (Language materials, printed)

Electrochemistry and corrosion science by: (Language materials, printed)

Handbook of maleic anhydride based materials = syntheses, properties and applications / by: (Language materials, printed)

Rare metal technology 2016 = proceedings of a symposium sponsored by the Hydrometallurgy and Electrometallurgy Commitee and the Extraction & Processing Division of The Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (Language materials, printed)

Rewas 2016 = towards materials resource sustainability : proceedings of a symposium sponsored by the Recycling and Environmental Technologies Committee, the Materials and Society Committee, the Extraction & Processing Division, and the Light Metals Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18 Downtown Nashville, Tennessee, Music City Center / by: (Language materials, printed)

Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016) = sponsored by the Advanced Characterization, Testing, and Simulation Committee of the Structural Materials Division of the Minerals, Metals & Materials Society (TMS), held July 17-21, 2016 Omni William Penn Hotel, Pittsburgh, Pennsylvania, USA / by: (Language materials, printed)

7th International Symposium on High-Temperature Metallurgical Processing = proceedings of a symposium sponsored by the Pyrometallurgy Committee of the Extraction and Processing Division (EPD) of the Minerals, Metals & Materials Society (TMS) held during TMS 2016 145th Annual Meeting & Exhibition, Downtown Nashville, Tennessee, Music City Center / by: (Language materials, printed)

Friction stir welding and processing VII = proceedings of a symposium sponsored by the Shaping and Forming Committee of the Materials Processing & Manufacturing Division of TMS (The Minerals, Metals & Materials Society) ; held during the TMS 2013 Annual Meeting & Exhibition San Antonio, Texas USA March 3-7, 2013 / by: (Language materials, printed)

EPD Congress 2016 = proceedings of symposia sponsored by the Extraction & Processing Division (EPD) of the Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (Language materials, printed)

Magnesium technology 2016 = proceeding of a symposium sponsored by Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (Language materials, printed)

Advances in the science and engineering of casting solidification = an MPMD Symposium Honoring Doru Michael Stefanescu : proceedings of a symposium sponsored by the Materials Processing & Manufacturing Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Florida, USA / by: (Language materials, printed)

3D MS = proceedings of the 2nd International Congress on 3D Materials Science : held by June 29-July 2, 2014, L'Imperial Palace, Annecy, France / by: (Language materials, printed)

TMS 2015 = 144th Annual Meeting & Exhibition : supplemental proceedings / by: (Language materials, printed)

Shape casting = 5th International Symposium 2014 :: proceedings of a symposium sponsored by the Aluminum Committee of the Light Metals Division and the Solidification Committee of the Materials Processing & Manufacturing Division of TMS (The Minerals, Metals & Materials Society), held during TMS 2014, 143rd Annual Meeting & Exhibition, February 16-20, 2014, San Diego Convention Center, San Diego, California, USA / by: (Language materials, printed)

Light metals 2014 = proceedings of the symposia sponsored by the TMS Aluminum Committee at the TMS 2014 Annual Meeting & Exhibition, February 16-20, 2014, San Diego, California, USA / by: (Language materials, printed)

Ni-Co 2013 = proceedings of symposium sponsored by the TMS Extraction & Processing Division, TMS High Temperature Alloys Committee, and the Metallurgy and Materials Society of the Canadian Institute of Mining, Metallurgy and Petroleum (CIM) : held during the TMS 2013 Annual Meeting & Exhibition, San Antonio, Texas, USA, March 3-7, 2013 / by: (Language materials, printed)

Magnesium technology 2013 = proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS), held during the TMS 2013 Annual Meeting & Exhibition, San Antonio, Texas, USA, March 3-7, 2013 / by: (Language materials, printed)

Light metals 2011 = proceedings of the technical sessions presented by the TMS Aluminum Committee at the TMS 2011 Annual Meeting & Exhibition, San Diego, California, USA, February 27-March 3, 2011 / by: (Language materials, printed)

The production and processing of inorganic materials by: (Language materials, printed)

Shape casting = 6th International Symposium : proceedings of a symposium sponsored by the Aluminum Committee of the Light Metals Division and the Solidification Committee of the Materials Processing & Manufacturing Division of The Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (Language materials, printed)

Friction stir welding and processing VIII = proceedings of a symposium sponsored by the Shaping and Forming Committee of the Materials Processing & Manufacturing Division of TMS (The Minerals, Metals & Materials Society) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (Language materials, printed)

Light metals 2012 = proceedings of the technical sessions presented by the TMS Aluminum Committee at the TMS 2012 Annual Meeting & Exhibition, Orlando, Florida, USA, March 11-15, 2012 / by: (Language materials, printed)

Energy technology 2016 = carbon dioxide management and other technologies : proceedings of the Energy Technologies and Carbon Dixoide Management Symposium, sponsored by the Energy Committee of the Extraction & Processing Division (EPD) and the Light Metals Division (LMD) of the Minerals, Metals & Materials Society (TMS) / by: (Language materials, printed)

Magnesium technology 2015 = proceedings of a symposium sponsored by Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (Language materials, printed)

Rare metal technology 2015 = proceedings of a symposium sponsored by the Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (Language materials, printed)

Essential readings in light metals.. Volume 4,. Electrode technology for aluminum production by: (Language materials, printed)

Magnesium technology 2012 = proceedings of symsposium sponsored by the Magnesium Committee of the Light Metals Division of The Minerals, Metals & Materials Society (TMS) ; held during TMS 2012 Annual Meeting & Exhibition, Orlando, Flordia, USA, March 11-15, 2012 / by: (Language materials, printed)

Diffusion in solids by: (Language materials, printed)

Characterization of minerals, metals, and materials 2016 = proceedings of a symposium sponsored by the Materials Characterization Committee of the Extraction and Processing Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18, Downtown Nashville, Tennessee, Music City Center / by: (Language materials, printed)

EPD Congress 2015 = proceedings of a symposia sponsored by the Extraction & Processing Division (EPD) of The Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (Language materials, printed)

6th International Symposium on High-Temperature Metallurgical Processing = proceedings of a symposium sponsored by the Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (Language materials, printed)

Energy technology 2015 = carbon dioxide management and other technologies : proceedings of the Energy Technologies and Carbon Dioxide Management Symposium, sponsored by the Energy Committee of the Extraction & Processing Division (EPD) and the Light Metals Division (LMD) of the Minerals, Metals & Materials Society (TMS) / by: (Language materials, printed)

Magnesium technology 2011 = proceedings of a symposium sponsored by the Magnesium Committee of the Light Metals Division of the Minerals, Metals & Materials Society (TMS), held during TMS 2011 Annual Meeting & Exhibition, San Diego, California, USA February 27-March 3, 2011 / by: (Language materials, printed)

Essential readings in light metals.. Volume 3,. Cast shop for aluminum production by: (Language materials, printed)

Celebrating the megascale = proceedings of the Extraction and Processing Division Symposium on Pyrometallurgy in Honor of David G.C. Robertson : proceedings of a symposium sponsored by the Extraction and Processing Division of the Minerals, Metals & Materials Society (TMS) held during TMS 2014, 143rd Annual Meeting & Exhibition, February 16-20, 2014, San Diego Convention Center, San Diego, California, USA / by: (Language materials, printed)

TMS 2014 = 143rd Annual Meeting & Exhibition : Annual meeting supplemental proceedings / by: (Language materials, printed)

Fatigue of materials III = advances and emergencies in understanding : proceedings of the third biennial symposium ; sponsored by The Minerals, Metals & Materials Society (TMS) and ASM International held during Materials Science & Technology 2014 (MS&T'14), October 12-16, 2014 in Pittsburgh, Pennsylvania / by: (Language materials, printed)

Drying, roasting, and calcining of minerals = proceedings of a symposium sponsored by The Minerals, Metals & Materials Society (TMS) held during TMS 2015, 144th Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (Language materials, printed)

Light metals 2015 = proceedings of the symposia sponsored by the TMS Alumnium Committee at the TMS 2015 Annual Meeting & Exhibition, March 15-19, 2015, Walt Disney World, Orlando, Florida, USA / by: (Language materials, printed)

Light metals 2016 = proceedings of the symposia sponsored by the Aluminum Committee of the Light Metals Division of The Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th Annual Meeting & Exhibition, February 14-18 Downtown Nashville, Tennessee, Music City Center / by: (Language materials, printed)

TMS 2016 = 145th Annual Meeting & Exhibition : supplemental proceedings / by: (Language materials, printed)

Proceedings of the 1st International Conference on 3D Materials Science = held July 8-12, 2012, Seven Springs Mountain Resort, Seven Springs, Pennsylvania, USA / by: (Language materials, printed)

REWAS 2013 = enabling materials resource sustainability : proceesdings of the symposium, REWAS 2013: enabling materials resource sustaunability, sponsored by the EPD-LMD Recycling and Environmental Technology Committee and the TMS Materials and Society Committee; and the symposium, Battery Recycling, sponsored by the EMPMD Energy Conversion and Storage Committee and the EPD-LMD Recycling and Environmental Technology Committee ; held during the TMS 2013 Annual Meeting & Exhibition, San Antonio, by: (Language materials, printed)

Proceedings of the TMS Middle East = Mediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015) : held January 11-14, 2015, Doha, Qatar / by: (Language materials, printed)

Engineering solutions for sustainability = materials and resources II : held at the TMS 2015 Annual Meeting, Orlando, Florida, USA, March 18-19, 2015 / by: (Language materials, printed)

Essential readings in light metals.. Volume 1,. Alumina and bauxite by: (Language materials, printed)

Advances in molten slags, fluxes, and salts = proceedings of the 10th International Conference on Molten Slags, Fluxes and Salts 2016 : sponsored by Extraction & Processing Division and Materials Processing and Manufacturing Division of The Minerals, Metals & Materials Society (TMS) ; held May 22-25, 2016, Seattle Grand Hyatt, Seattle, Washington, USA / by: (Language materials, printed)

Essential readings in light metals.. Volume 2,. Aluminum reduction technology by: (Language materials, printed)

PRICM 8 = proceedings of the 8th Pacific Rim International Congress on Advanced Materials and Processing : sponsored by The Chinese Society for Metals (CSM), The Japan Institute of Metals (JIM), The Korean Institute of Metals and Materials (KIM), Materials Australia (MA), and the Minerals, Metals & Materials Society (TMS) ; held August 4-9, 2013, at the Hilton Waikoloa Village in Waikoloa, Hawaii, USA / by: (Language materials, printed)

Energy Materials 2014 = conference proceedings : November 4-6, 2014, Xi'an, Shaanxi Province, China / by: (Language materials, printed)

HSLA steels 2015, microalloying 2015 & offshore engineering steels 2015 = conference proceedings, held November 11-13th, 2015, Hangzhou, Zhejiang Province, China / by: (Language materials, printed)

Solutions manual to accompany Transport phenomena in materials processing by: (Language materials, printed)

CFD modeling and simulation in materials processing 2016 = proceedings of a symposium sponsored by the Process Technology and Modeling Committee of the Extraction and Processing Division and the Solidification Committee of the Materials Processing and Manufacturing Division of The Minerals, Metals & Materials Society (TMS) held during TMS 2016, 145th annual meeting & exhibition, Februrary 14-18, Downton Nashville, Tennessee Music City Center / by: (Language materials, printed)

Light metals 2013 = proceedings of the symposia sponsored by the TMS Aluminum Committee at the TMS 2013 Annual Meeting & Exhibition, San Antonio, Texas, USA March 3-7, 2013 / by: (Language materials, printed)

Proceedings of the 4th World Congress on Integrated Computational Materials Engineering (ICME 2017) by: (Language materials, printed)

On the time and temperature dependent behaviour of laminated amorphous polymers subjected to low-velocity impact by: (Language materials, printed)

Mechanics for materials and technologies by: (Language materials, printed)

Protection of materials and structures from the space environment = ICPMSE-11 / by: (Language materials, printed)

Polymer-engineered nanostructures for advanced energy applications by: (Language materials, printed)

Novel Bismuth-Oxyhalide-based materials and their applications by: (Language materials, printed)

Ultrathin carbon-based overcoats for extremely high density magnetic recording by: (Language materials, printed)

Smart and multifunctional concrete toward sustainable infrastructures by: (Language materials, printed)

The theory of laser materials processing = heat and mass transfer in modern technology / by: (Language materials, printed)

Deformation and fracture behaviour of polymer materials by: (Language materials, printed)

Raw materials substitution sustainability by: (Language materials, printed)

Applied metallurgy and corrosion control = a handbook for the petrochemical industry / by: (Language materials, printed)

Shock and materials by: (Language materials, printed)

Proceedings of the International Conference on Martensitic Transformations = Chicago / by: (Language materials, printed)

Modeling, design, construction, and operation of power generators with solid oxide fuel cells = from single cell to complete power system / by: (Language materials, printed)

Renewable and sustainable materials in green technology by: (Language materials, printed)

Magnetostatic modelling of thin layers using the method of moments and its implementation in Octave/Matlab by: (Language materials, printed)

Advanced functional materials = proceedings of Chinese Materials Conference 2017 / by: (Language materials, printed)

Materials that move = smart materials, intelligent design / by: (Language materials, printed)

Progress in materials science and engineering by: (Language materials, printed)

Mechanical properties and working of metals and alloys by: (Language materials, printed)

Fire retardancy behavior of polymer/clay nanocomposites by: (Language materials, printed)

Handbook of sol-gel science and technology = processing, characterization and applications / by: (Language materials, printed)

Advanced manufacturing and materials science = selected extended papers of ICAMMS 2018 / by: (Language materials, printed)

The selected models of the mesostructure of composites = percolation, clusters, force fields / by: (Language materials, printed)

Phase equilibria diagrams of high-temperature non-oxide ceramics by: (Language materials, printed)

Carbon and metal oxides based nanomaterials for flexible high performance asymmetric supercapacitors by: (Language materials, printed)

Computer algebra and materials physics = a practical guidebook to group theoretical computations in materials science / by: (Language materials, printed)

Acetylene and its polymers = 150+ years of history / by: (Language materials, printed)

Springer handbook of materials data by: (Language materials, printed)

Materials handbook = a concise desktop reference / by: (Language materials, printed)

Powerful pulsed plasma generators = research and application / by: (Language materials, printed)

Doped-ceria electrolytes = synthesis, sintering and characterization / by: (Language materials, printed)

Extraction 2018 = proceedings of the First Global Conference on Extractive Metallurgy / by: (Language materials, printed)

Physical metallurgy of cast irons by: (Language materials, printed)

Industrial applications of poly(lactic acid) by: (Language materials, printed)

Materials chemistry by: (Language materials, printed)

Handbook of materials characterization by: (Language materials, printed)

Corrosion science and engineering by: (Language materials, printed)

Materials discovery and design = by means of data science and optimal learning / by: (Language materials, printed)

Solidification processing of metallic alloys under external fields by: (Language materials, printed)

Advances in polymer sciences and technology = select papers from APA 2017 / by: (Language materials, printed)

Polymer reaction engineering of dispersed systems.. Volume I by: (Language materials, printed)

Polymer reaction engineering of dispersed systems.. Volume II by: (Language materials, printed)

Handbook of mechanics of materials by: (Language materials, printed)

High-entropy materials = a brief introduction / by: (Language materials, printed)

Mechanical fatigue of metals = experimental and simulation perspectives / by: (Language materials, printed)

Characterisation of turbulent duct flows = experiments and direct numerical simulations / by: (Language materials, printed)

Sustainable lignin for carbon fibers = principles, techniques and applications / by: (Language materials, printed)

Nanoelectronic materials = fundamentals and applications / by: (Language materials, printed)

Functional textiles and clothing by: (Language materials, printed)

Materials and manufacturing processes by: (Language materials, printed)

Computational homogenization of heterogeneous materials with finite elements by: (Language materials, printed)

Marine-derived biomaterials for tissue engineering applications by: (Language materials, printed)

Trends in materials engineering = select proceedings of ICFTMM 2018 / by: (Language materials, printed)

Mechanical properties of silicon based compounds = silicides / by: (Language materials, printed)

Clean ironmaking and steelmaking processes = efficient technologies for greenhouse emissions abatement / by: (Language materials, printed)

Particles in contact = micro mechanics, micro process dynamics and particle collective / by: (Language materials, printed)

Residual stress, thermomechanics & infrared imaging, hybrid techniques and inverse problems. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /. Volume 9 by: (Language materials, printed)

Composite materials = processing, applications, characterizations / by: (Language materials, printed)

Phosphors, up conversion nano particles, quantum dots and their applications.. Volume 1 by: (Language materials, printed)

Material parameter identification and inverse problems in soft tissue biomechanics by: (Language materials, printed)

Mechanics of composite and multi-functional materials. = proceedings of the 2016 Annual Conference on Experimental and Applied Mechanics /. Volume 7 by: (Language materials, printed)

Inorganic scintillators for detector systems = physical principles and crystal engineering / by: (Language materials, printed)

Programming phase-field modeling by: (Language materials, printed)

Materials, energy and environment engineering = select proceedings of ICACE 2015 / by: (Language materials, printed)

Engineering applications of nanotechnology = from energy to drug delivery / by: (Language materials, printed)

Models, simulation, and experimental issues in structural mechanics by: (Language materials, printed)

Proceedings of the IV Advanced Ceramics and Applications Conference by: (Language materials, printed)

Fillers for polymer applications by: (Language materials, printed)

Charge-trapping non-volatile memories.. Volume 2,. Emerging materials and structures by: (Language materials, printed)

Applications of process engineering principles in materials processing, energy and environmental technologies = an EPD symposium in honor of Professor Ramana G. Reddy / by: (Language materials, printed)

Mechanical and creep behavior of advanced materials = a SMD symposium honoring Professor K. Linga Murty / by: (Language materials, printed)

8th International Symposium on High-Temperature Metallurgical Processing by: (Language materials, printed)

Characterization of minerals, metals, and materials 2017 by: (Language materials, printed)

TMS 2017 = 146th Annual Meeting & Exhibition Supplemental Proceedings / by: (Language materials, printed)

Light metals 2017 by: (Language materials, printed)

Materials processing fundamentals 2017 by: (Language materials, printed)

Proceedings of the 3rd Pan American Materials Congress by: (Language materials, printed)

Friction stir welding and processing IX by: (Language materials, printed)

Magnesium technology 2017 by: (Language materials, printed)

Submicron porous materials by: (Language materials, printed)

Basic thermochemistry in materials processing by: (Language materials, printed)

Green biocomposites = design and applications / by: (Language materials, printed)

Mixed convection in fluid superposed porous layers by: (Language materials, printed)

Eco-friendly Polymer Nanocomposites = Chemistry and Applications / by: (Language materials, printed)

A Primer on the Geometry of Carbon Nanotubes and Their Modifications by: (Language materials, printed)

Temperature Measurement during Millisecond Annealing = Ripple Pyrometry for Flash Lamp Annealers / by: (Language materials, printed)

Handbuch Hochtemperatur-Werkstofftechnik = Grundlagen, Werkstoffbeanspruchungen, Hochtemperaturlegierungen und -beschichtungen / by: (Language materials, printed)

Modeling Approaches to Natural Convection in Porous Media by: (Language materials, printed)

Neue Entwicklungen in der Additiven Fertigung = Beiträge aus der wissenschaftlichen Tagung der Rapid.Tech 2015 / by: (Language materials, printed)

Nanopartikel in aquatischen Systemen = Eine kurze Einführung / by: (Language materials, printed)

Advances in Structural Engineering = Mechanics, Volume One / by: (Language materials, printed)

Mechanics of Materials = An Introduction to Engineering Technology / by: (Language materials, printed)

Advances in Structural Engineering = Materials, Volume Three / by: (Language materials, printed)

Nanoporous Alumina = Fabrication, Structure, Properties and Applications / by: (Language materials, printed)

Eco-friendly Polymer Nanocomposites = Processing and Properties / by: (Language materials, printed)

Defects and Impurities in Silicon Materials = An Introduction to Atomic-Level Silicon Engineering / by: (Language materials, printed)

Advances in Structural Engineering = Dynamics, Volume Two / by: (Language materials, printed)

From Creep Damage Mechanics to Homogenization Methods = A Liber Amicorum to celebrate the birthday of Nobutada Ohno / by: (Language materials, printed)

Werkstoffkunde = Strukturen, Eigenschaften, Prüfung / by: (Language materials, printed)

Electro-Chemo-Mechanics of Anodic Porous Alumina Nano-Honeycombs: Self-Ordered Growth and Actuation by: (Language materials, printed)

Elektrisch leitfähige Polymerwerkstoffe = Ein Überblick für Studierende und Praktiker / by: (Language materials, printed)

Materialwissenschaft und Werkstofftechnik = Ein Ritt auf der Rasierklinge / by: (Language materials, printed)

Insight into Designing Biocompatible Magnesium Alloys and Composites = Processing, Mechanical and Corrosion Characteristics / by: (Language materials, printed)

Furniture Design by: (Language materials, printed)

Optical Metamaterials by Block Copolymer Self-Assembly by: (Language materials, printed)

Transparent Ceramics by: (Language materials, printed)

Electrochemically Engineered Nanoporous Materials = Methods, Properties and Applications / by: (Language materials, printed)

Proceedings of the TMS Middle East - Mediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015) by: (Language materials, printed)

EPD Congress 2015 by: (Language materials, printed)

Refractive Indices of Solids by: (Language materials, printed)

Rare Metal Technology 2015 by: (Language materials, printed)

Advances in the Science and Engineering of Casting Solidification = An MPMD Symposium Honoring Doru Michael Stefanescu / by: (Language materials, printed)

Self-healing Materials by: (Language materials, printed)

Magnesium Technology 2013 by: (Language materials, printed)

Electromagnetic Ultrasonic Guided Waves by: (Language materials, printed)

Biomaterials and Medical Devices = A Perspective from an Emerging Country / by: (Language materials, printed)

Information Science for Materials Discovery and Design by: (Language materials, printed)

The Automated Design of Materials Far From Equilibrium by: (Language materials, printed)

Neural Engineering = From Advanced Biomaterials to 3D Fabrication Techniques / by: (Language materials, printed)

Drying, Roasting, and Calcining of Minerals by: (Language materials, printed)

TMS 2016 145th Annual Meeting & Exhibition, Annual Meeting Supplemental Proceedings by: (Language materials, printed)

Essential Readings in Light Metals, Volume 2, Aluminum Reduction Technology by: (Language materials, printed)

Friction Stir Welding and Processing VIII by: (Language materials, printed)

Advances in Molten Slags, Fluxes, and Salts = Proceedings of the 10th International Conference on Molten Slags, Fluxes, and Salts 2016 / by: (Language materials, printed)

REWAS 2016 = Towards Materials Resource Sustainability / by: (Language materials, printed)

REWAS 2013 = Enabling Materials Resource Sustainability / by: (Language materials, printed)

Transport Phenomena in Materials Processing = Solutions Manual / by: (Language materials, printed)

Light Metals 2013 by: (Language materials, printed)

6th International Symposium on High-Temperature Metallurgical Processing by: (Language materials, printed)

Silica Aerogel Composites = Novel Fabrication Methods / by: (Language materials, printed)

Characterization of Minerals, Metals, and Materials 2016 by: (Language materials, printed)

Advances in Nanocomposites = Modeling, Characterization and Applications / by: (Language materials, printed)

Spectroscopy and Optical Diagnostics for Gases by: (Language materials, printed)

Phosphors, Up Conversion Nano Particles, Quantum Dots and Their Applications = Volume 2 / by: (Language materials, printed)

Active Terahertz Metamaterial for Biomedical Applications by: (Language materials, printed)

Fatigue of Materials III = Advances and Emergences in Understanding / by: (Language materials, printed)

Corrosion Control and Surface Finishing = Environmentally Friendly Approaches / by: (Language materials, printed)

Advancement of Optical Methods in Experimental Mechanics, Volume 3 = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics / by: (Language materials, printed)

Light Metals 2014 by: (Language materials, printed)

Peptide-Mediated Biomineralization by: (Language materials, printed)

Werkstoffwissenschaften und Fertigungstechnik = Eigenschaften, Vorgänge, Technologien / by: (Language materials, printed)

Light Metals 2016 by: (Language materials, printed)

EPD Congress 2016 by: (Language materials, printed)

Metalle = Struktur und Eigenschaften der Metalle und Legierungen / by: (Language materials, printed)

Rare Metal Technology 2016 by: (Language materials, printed)

Planung von Autobahnen und Landstraßen by: (Language materials, printed)

Essential Readings in Light Metals, Volume 3, Cast Shop for Aluminum Production by: (Language materials, printed)

TMS 2014 143rd Annual Meeting & Exhibition, Annual Meeting Supplemental Proceedings by: (Language materials, printed)

Materials for Energy Infrastructure by: (Language materials, printed)

Particulate Composites = Fundamentals and Applications / by: (Language materials, printed)

1st International Conference on 3D Materials Science, 2012 = Conference Proceedings / by: (Language materials, printed)

Shape Casting = 5th International Symposium 2014 / by: (Language materials, printed)

Magnesium Technology 2012 by: (Language materials, printed)

Generalized Continua as Models for Classical and Advanced Materials by: (Language materials, printed)

Proceedings of the 8th Pacific Rim International Conference on Advanced Materials and Processing (PRICM-8) by: (Language materials, printed)

Ni-Co 2013 by: (Language materials, printed)

Energy Technology 2016 = Carbon Dioxide Management and Other Technologies / by: (Language materials, printed)

Power Systems Grounding by: (Language materials, printed)

Diffusion in Solids by: (Language materials, printed)

Challenges in Mechanics of Time Dependent Materials, Volume 2 = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics / by: (Language materials, printed)

Magnesium Technology 2015 by: (Language materials, printed)

Textile Materials for Lightweight Constructions = Technologies - Methods - Materials - Properties / by: (Language materials, printed)

Light Metals 2011 by: (Language materials, printed)

7th International Symposium on High-Temperature Metallurgical Processing by: (Language materials, printed)

Nanoclay Reinforced Polymer Composites = Nanocomposites and Bionanocomposites / by: (Language materials, printed)

Engineering Solutions for Sustainability = Materials and Resources II / by: (Language materials, printed)

Magnesium Technology 2011 by: (Language materials, printed)

Proceedings of the III Advanced Ceramics and Applications Conference by: (Language materials, printed)

Nanomaterials in Extreme Environments = Fundamentals and Applications / by: (Language materials, printed)

Light Metals 2015 by: (Language materials, printed)

Physics and Mechanics of Primary Well Cementing by: (Language materials, printed)

Stabilität von ultraleichten Schaumbetonen = Betrachtung instationärer Porenstrukturen / by: (Language materials, printed)

Mechanothermodynamics by: (Language materials, printed)

Light Metals 2012 by: (Language materials, printed)

Electromechanically Active Polymers = A Concise Reference / by: (Language materials, printed)

Nano and Biotech Based Materials for Energy Building Efficiency by: (Language materials, printed)

Energy Technology 2015 = Carbon Dioxide Management and Other Technologies / by: (Language materials, printed)

Handbook of Maleic Anhydride Based Materials = Syntheses, Properties and Applications / by: (Language materials, printed)

Solid Oxide Fuel Cell Components = Interfacial Compatibility of SOFC Glass Seals / by: (Language materials, printed)

Recyclingtechnik = Fachbuch für Lehre und Praxis / by: (Language materials, printed)

Electrochemistry and Corrosion Science by: (Language materials, printed)

Proceedings of the 6th International Conference on Recrystallization and Grain Growth (ReX&GG 2016) by: (Language materials, printed)

Friction Stir Welding and Processing VII by: (Language materials, printed)

Microstructure-Property Correlations for Hard, Superhard, and Ultrahard Materials by: (Language materials, printed)

Handbook of Bioceramics and Biocomposites by: (Language materials, printed)

Celebrating the Megascale = Proceedings of the Extraction and Processing Division Symposium on Pyrometallurgy in Honor of David G.C. Robertson / by: (Language materials, printed)

Mechanics of Composite and Multi-functional Materials, Volume 7 = Proceedings of the 2015 Annual Conference on Experimental and Applied Mechanics / by: (Language materials, printed)

Essential Readings in Light Metals, Volume 1, Alumina and Bauxite by: (Language materials, printed)

Energy Materials 2014 = Conference Proceedings / by: (Language materials, printed)

Design and Analysis of Reinforced Fiber Composites by: (Language materials, printed)

Nanoclay Reinforced Polymer Composites = Natural Fibre/Nanoclay Hybrid Composites / by: (Language materials, printed)

The Production and Processing of Inorganic Materials by: (Language materials, printed)

HSLA Steels 2015, Microalloying 2015 & Offshore Engineering Steels 2015 = Conference Proceedings / by: (Language materials, printed)

Fluid Flow and Heat Transfer in Rotating Porous Media by: (Language materials, printed)

Surface Modifications and Growth of Titanium Dioxide for Photo-Electrochemical Water Splitting by: (Language materials, printed)

Magnesium Technology 2016 by: (Language materials, printed)

CFD Modeling and Simulation in Materials Processing 2016 by: (Language materials, printed)

Smart Intelligent Aircraft Structures (SARISTU) = Proceedings of the Final Project Conference / by: (Language materials, printed)

Carbon Nanoparticles and Nanostructures by: (Language materials, printed)

Essential Readings in Light Metals, Volume 4, Electrode Technology for Aluminum Production by: (Language materials, printed)

Shape Casting = 6th International Symposium / by: (Language materials, printed)

The 2nd International Congress on 3D Materials Science = Congress Proceedings / by: (Language materials, printed)

TMS 2015 144th Annual Meeting & Exhibition, Annual Meeting Supplemental Proceedings by: (Language materials, printed)

Materials Processing Fundamentals 2018 by: (Language materials, printed)

Modeling, Design, Construction, and Operation of Power Generators with Solid Oxide Fuel Cells = From Single Cell to Complete Power System / by: (Language materials, printed)

Materials Discovery and Design = By Means of Data Science and Optimal Learning / by: (Language materials, printed)

Solidification Processing of Metallic Alloys Under External Fields by: (Language materials, printed)

Powerful Pulsed Plasma Generators = Research and Application / by: (Language materials, printed)

Proceedings of the International Conference on Martensitic Transformations: Chicago by: (Language materials, printed)

Advances in Polymer Sciences and Technology = Select Papers from APA 2017 / by: (Language materials, printed)

Corrosion Science and Engineering by: (Language materials, printed)

Spin Dynamics and Damping in Ferromagnetic Thin Films and Nanostructures by: (Language materials, printed)

Maschinenbau = Ein Lehrbuch für das ganze Bachelor-Studium / by: (Language materials, printed)

Polymer Reaction Engineering of Dispersed Systems = Volume I / by: (Language materials, printed)

Materials Chemistry by: (Language materials, printed)

Doped-Ceria Electrolytes = Synthesis, Sintering and Characterization / by: (Language materials, printed)

Physical Metallurgy of Cast Irons by: (Language materials, printed)

Adaptronik = Prinzipe - Funktionswerkstoffe - Funktionselemente - Zielfelder mit Forschungsbeispielen / by: (Language materials, printed)

Werkstoff- und Prozessverhalten von Metallpulvern in der laseradditiven Fertigung by: (Language materials, printed)

Springer Handbook of Materials Data by: (Language materials, printed)

Industrial Applications of Poly(lactic acid) by: (Language materials, printed)

Advanced Manufacturing and Materials Science = Selected Extended Papers of ICAMMS 2018 / by: (Language materials, printed)

Acetylene and Its Polymers = 150+ Years of History / by: (Language materials, printed)

Advances in Nanomaterials = Fundamentals, Properties and Applications / by: (Language materials, printed)

Proceedings of the International Conference on Microplastic Pollution in the Mediterranean Sea by: (Language materials, printed)

Ferroic Functional Materials = Experiment, Modeling and Simulation / by: (Language materials, printed)

Mechanical Properties and Working of Metals and Alloys by: (Language materials, printed)

Handbook of Materials Characterization by: (Language materials, printed)

Extraction 2018 = Proceedings of the First Global Conference on Extractive Metallurgy / by: (Language materials, printed)

Polymer Reaction Engineering of Dispersed Systems = Volume II / by: (Language materials, printed)

9th International Symposium on High-Temperature Metallurgical Processing by: (Language materials, printed)

Magnetostatic Modelling of Thin Layers Using the Method of Moments And Its Implementation in OCTAVE/MATLAB by: (Language materials, printed)

Advanced Functional Materials = Proceedings of Chinese Materials Conference 2017 / by: (Language materials, printed)

Praxishandbuch der Kreislauf- und Rohstoffwirtschaft by: (Language materials, printed)

Metal-Matrix Composites Innovations, Advances and Applications = An SMD Symposium in Honor of William C. Harrigan, Jr. / by: (Language materials, printed)

Materials that Move = Smart Materials, Intelligent Design / by: (Language materials, printed)

Von Rubinen und Implantaten = Aluminiumoxid und seine vielfältige Welt / by: (Language materials, printed)

Progress in Materials Science and Engineering by: (Language materials, printed)

Fire Retardancy Behavior of Polymer/Clay Nanocomposites by: (Language materials, printed)

Bionanocomposites for Packaging Applications by: (Language materials, printed)

Properties of Fresh and Hardened Concrete Containing Supplementary Cementitious Materials = State-of-the-Art Report of the RILEM Technical Committee 238-SCM, Working Group 4 / by: (Language materials, printed)

Handbook of Sol-Gel Science and Technology = Processing, Characterization and Applications / by: (Language materials, printed)

Phase Equilibria Diagrams of High Temperature Non-oxide Ceramics by: (Language materials, printed)

Shock and Materials by: (Language materials, printed)

Carbon and Metal Oxides Based Nanomaterials for Flexible High Performance Asymmetric Supercapacitors by: (Language materials, printed)

Computer Algebra and Materials Physics = A Practical Guidebook to Group Theoretical Computations in Materials Science / by: (Language materials, printed)

Werkstoffe und ihre Anwendungen = Metalle, Kunststoffe und mehr / by: (Language materials, printed)

The Selected Models of the Mesostructure of Composites = Percolation, Clusters, and Force Fields / by: (Language materials, printed)

Fertigungstechnik by: (Language materials, printed)

Physical Test Methods for Elastomers by: (Language materials, printed)

Renewable and Sustainable Materials in Green Technology by: (Language materials, printed)

Characterization of Minerals, Metals, and Materials 2018 by: (Language materials, printed)

Proceedings of the Symposium of Aeronautical and Aerospace Processes, Materials and Industrial Applications = Presented at the XXV International Materials Research Congress – Cancun 2016 / by: (Language materials, printed)

Carbon = The Black, the Gray and the Transparent / by: (Language materials, printed)

Die Reaktivität von Hüttensand als Betonzusatzstoff = Eine thermogravimetrische Systemstudie / by: (Language materials, printed)

TMS 2018 147th Annual Meeting & Exhibition Supplemental Proceedings by: (Language materials, printed)

Light Metals 2018 by: (Language materials, printed)

China's High-Speed Rail Technology = An International Perspective / by: (Language materials, printed)

Frontiers in Materials Processing, Applications, Research and Technology = Select Proceedings of FiMPART 2015 / by: (Language materials, printed)

Magnesium Technology 2018 by: (Language materials, printed)

Advanced High Strength Steel = Processing and Applications / by: (Language materials, printed)

Materials Handbook = A Concise Desktop Reference / by: (Language materials, printed)

Electrochemistry for Corrosion Fundamentals by: (Language materials, printed)

Wood Polymer Nanocomposites = Chemical Modifications, Properties and Sustainable Applications / by: (Language materials, printed)

Ceramic Membranes Applied in Separation Processes by: (Language materials, printed)

The Political Economy of Russian Aluminium = Between the Dual State and Global Markets / by: (Language materials, printed)

Trends in Materials Engineering = Select Proceedings of ICFTMM 2018 / by: (Language materials, printed)

Cascade Use in Technologies 2018 = Internationale Konferenz zur Kaskadennutzung und Kreislaufwirtschaft – Oldenburg 2018 / by: (Language materials, printed)

Computational Homogenization of Heterogeneous Materials with Finite Elements by: (Language materials, printed)

Advances in Materials, Mechanical and Industrial Engineering = Selected Contributions from the First International Conference on Mechanical Engineering, Jadavpur University, Kolkata, India / by: (Language materials, printed)

Dictionary of Production Engineering I / Wörterbuch der Fertigungstechnik I / Dizionario di Ingegneria della Produzione I = Metal Forming / Umformtechnik / Formatura dei Metalli. by: (Language materials, printed)

Electronic Waste and Printed Circuit Board Recycling Technologies by: (Language materials, printed)

Novel Aspects of Diamond = From Growth to Applications / by: (Language materials, printed)

Technologiefusion für multifunktionale Leichtbaustrukturen = Ressourceneffizienz durch die Schlüsseltechnologie "Leichtbau" / by: (Language materials, printed)

Materialien der Elektronik und Energietechnik = Halbleiter, Graphen, Funktionale Materialien / by: (Language materials, printed)

Highway Engineering Composite Material and Its Application by: (Language materials, printed)

Mechanical Properties of Silicon Based Compounds: Silicides by: (Language materials, printed)

Sustainable Lignin for Carbon Fibers: Principles, Techniques, and Applications by: (Language materials, printed)

Handbook of Nonlocal Continuum Mechanics for Materials and Structures by: (Language materials, printed)

Handbuch Hochtemperatur-Werkstofftechnik = Grundlagen, Werkstoffbeanspruchungen, Hochtemperaturlegierungen und -beschichtungen / by: (Language materials, printed)

Green Materials Engineering = An EPD Symposium in Honor of Sergio Monteiro / by: (Language materials, printed)

Near Net Shape Manufacturing Processes by: (Language materials, printed)

Semiconducting Metal Oxides for Gas Sensing by: (Language materials, printed)

Light Weighting for Defense, Aerospace, and Transportation by: (Language materials, printed)

TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings by: (Language materials, printed)

Basic Quantum Mechanics by: (Language materials, printed)

REWAS 2019 = Manufacturing the Circular Materials Economy / by: (Language materials, printed)

Marine-Derived Biomaterials for Tissue Engineering Applications by: (Language materials, printed)

Vibration Analysis of Functionally Graded Piezoelectric Actuators by: (Language materials, printed)

Bio-based Polymers and Nanocomposites = Preparation, Processing, Properties & Performance / by: (Language materials, printed)

Friction Stir Welding and Processing X by: (Language materials, printed)

A Practical Guide to Surface Metrology by: (Language materials, printed)

Progress in Engineering Technology = Automotive, Energy Generation, Quality Control and Efficiency / by: (Language materials, printed)

Metalle = Struktur und Eigenschaften der Metalle und Legierungen / by: (Language materials, printed)

Analysis of Glass Panels Subjected to Blast Load by: (Language materials, printed)

Mikrostrukturbasierte Bewertung des Korrosionsermüdungsverhaltens der Magnesiumlegierungen DieMag422 und AE42 by: (Language materials, printed)

Shape Casting = 7th International Symposium Celebrating Prof. John Campbell's 80th Birthday / by: (Language materials, printed)

Entwicklung einer ganzheitlichen Methode zur Bestimmung des dehnratenabhängigen Verhaltens faserverstärkter Kunststoffe by: (Language materials, printed)

Materials Processing Fundamentals 2019 by: (Language materials, printed)

Physics and Techniques of Ceramic and Polymeric Materials = Proceedings of Chinese Materials Conference 2018 / by: (Language materials, printed)

Handbook of Ecomaterials by: (Language materials, printed)

Advanced Real Time Imaging II = Cutting-Edge Techniques in Materials Science Studies / by: (Language materials, printed)

Dynamic Behavior of Materials, Volume 1 = Proceedings of the 2018 Annual Conference on Experimental and Applied Mechanics / by: (Language materials, printed)

Light Metals 2019 by: (Language materials, printed)

Betriebsfestigkeitsanalyse elektrifizierter Fahrzeuge = Multilevel-Ansätze zur Absicherung von HV-Batterien und elektrischen Steckkontakten / by: (Language materials, printed)

Spark Plasma Sintering of Materials = Advances in Processing and Applications / by: (Language materials, printed)

Innovations and Breakthroughs in the Gold and Silver Industries = Concepts, Applications and Future Trends / by: (Language materials, printed)

Pipeline Steels for Sour Service by: (Language materials, printed)

Heißisostatisches Pressen von Aluminiumgusslegierungen mit integrierter Wärmebehandlung by: (Language materials, printed)

Advanced Functional Materials from Nanopolysaccharides by: (Language materials, printed)

Thermal Properties of Bio-based Polymers by: (Language materials, printed)

Surface Engineering of Graphene by: (Language materials, printed)

Nanoelectronic Materials = Fundamentals and Applications / by: (Language materials, printed)

Micro-electrical Discharge Machining Processes = Technologies and Applications / by: (Language materials, printed)

3D Printing and Additive Manufacturing Technologies by: (Language materials, printed)

Monodisperse Highly Ordered and Polydisperse Biobased Solid Foams by: (Language materials, printed)

High-Entropy Materials = A Brief Introduction / by: (Language materials, printed)

Innovation in Materials Science and Engineering = Proceedings of ICEMIT 2017, Volume 2 / by: (Language materials, printed)

Advances in Sustainable Polymers = Processing and Applications / by: (Language materials, printed)

Nanoengineering Materials for Biomedical Uses by: (Language materials, printed)

Characterisation of Turbulent Duct Flows = Experiments and Direct Numerical Simulations / by: (Language materials, printed)

Magnesium Technology 2019 by: (Language materials, printed)

Materials Design and Applications II by: (Language materials, printed)

Advanced Engineering for Processes and Technologies by: (Language materials, printed)

Festigkeitslehre für Wirtschaftsingenieure = Mit Verständnisfragen, vielen Beispielen und Aufgaben mit kleinschrittigen Lösungen / by: (Language materials, printed)

Functional Textiles and Clothing by: (Language materials, printed)

Handbook of Mechanics of Materials by: (Language materials, printed)

Polypropylene Handbook = Morphology, Blends and Composites / by: (Language materials, printed)

Advances in Thin Films, Nanostructured Materials, and Coatings = Selected Papers from the 2018 International Conference on “Nanomaterials: Applications & Properties” / by: (Language materials, printed)

Structural Materials = Properties and Selection / by: (Language materials, printed)

IRC-SET 2018 = Proceedings of the 4th IRC Conference on Science, Engineering and Technology / by: (Language materials, printed)

Anisotropic Metal Chalcogenide Nanomaterials = Synthesis, Assembly, and Applications / by: (Language materials, printed)

Advances in Materials and Metallurgy = Select Proceedings of ICEMMM 2018 / by: (Language materials, printed)

Charakterisierung spanlos gefertigter Innengewinde in Aluminium- und Magnesium-Leichtbauwerkstoffen by: (Language materials, printed)

Aktuelle Werkstoffe = Neue Materialien für innovative Produkte / by: (Language materials, printed)

Nano-Energetic Materials by: (Language materials, printed)

Die-Attach Materials for High Temperature Applications in Microelectronics Packaging = Materials, Processes, Equipment, and Reliability / by: (Language materials, printed)

Glasfasern by: (Language materials, printed)

Clean Ironmaking and Steelmaking Processes = Efficient Technologies for Greenhouse Emissions Abatement / by: (Language materials, printed)

Hot Stamping of Ultra High-Strength Steels = From a Technological and Business Perspective / by: (Language materials, printed)

Graphene Functionalization Strategies = From Synthesis to Applications / by: (Language materials, printed)

Advances and Challenges in Structural Engineering = Proceedings of the 2nd GeoMEast International Congress and Exhibition on Sustainable Civil Infrastructures, Egypt 2018 – The Official International Congress of the Soil-Structure Interaction Group in Egypt (SSIGE) / by: (Language materials, printed)

Particles in Contact = Micro Mechanics, Micro Process Dynamics and Particle Collective / by: (Language materials, printed)

Materials and Manufacturing Processes by: (Language materials, printed)

Willemite-Based Glass Ceramic Doped by Different Percentage of Erbium Oxide and Sintered in Temperature of 500-1100C = Physical and Optical Properties / by: (Language materials, printed)

Self-Healing Nanotextured Vascular Engineering Materials by: (Language materials, printed)

Mechanical Fatigue of Metals = Experimental and Simulation Perspectives / by: (Language materials, printed)

Praktikum in Werkstoffkunde = 100 ausführliche Versuche aus wichtigen Gebieten der Werkstofftechnik / by: (Language materials, printed)

Werkstoffe = Aufbau und Eigenschaften von Keramik-, Metall-, Polymer- und Verbundwerkstoffen / by: (Language materials, printed)

Advances in Manufacturing Processes = Select Proceedings of ICEMMM 2018 / by: (Language materials, printed)

10th International Symposium on High-Temperature Metallurgical Processing by: (Language materials, printed)

Characterization of Minerals, Metals, and Materials 2019 by: (Language materials, printed)

Reliability of Selective Laser Melted AlSi12 Alloy for Quasistatic and Fatigue Applications by: (Language materials, printed)

Strengthening and Joining by Plastic Deformation = Select Papers from AIMTDR 2016 / by: (Language materials, printed)

Stahlerzeugung = Integrierte Hüttenwerks- und Gasreinigungsanlagen / by: (Language materials, printed)

Proceedings of the 4th International Symposium on Materials and Sustainable Development = Volume 1: Nano Technology and Advanced Materials / by: (Language materials, printed)

Handbook of Ecomaterials by: (Language materials, printed)

Plasticity, Damage and Fracture in Advanced Materials by: (Language materials, printed)

Aquatic Biopolymers = Understanding their Industrial Significance and Environmental Implications / by: (Language materials, printed)

Advances in Additive Manufacturing and Joining = Proceedings of AIMTDR 2018 / by: (Language materials, printed)

iMEC-APCOMS 2019 = Proceedings of the 4th International Manufacturing Engineering Conference and The 5th Asia Pacific Conference on Manufacturing Systems / by: (Language materials, printed)

Über das Potenzial von calciniertem Ton in zementgebundenen Systemen = Materialcharakterisierung und Reaktionsverhalten / by: (Language materials, printed)

Light Metals 2020 by: (Language materials, printed)

11th International Symposium on High-Temperature Metallurgical Processing by: (Language materials, printed)

Advances in Sustainable Polymers = Synthesis, Fabrication and Characterization / by: (Language materials, printed)

Heatmetry = The Science and Practice of Heat Flux Measurement / by: (Language materials, printed)

Rare Metal Technology 2020 by: (Language materials, printed)

Additive Manufacturing Processes by: (Language materials, printed)

Aerospace Alloys by: (Language materials, printed)

PbZn 2020: 9th International Symposium on Lead and Zinc Processing by: (Language materials, printed)

Introduction to Refractories for Iron- and Steelmaking by: (Language materials, printed)

Advances in Materials Processing = Select Proceedings of ICFMMP 2019 / by: (Language materials, printed)

Emerging Research in Science and Engineering Based on Advanced Experimental and Computational Strategies by: (Language materials, printed)

Green Production of Carbon Nanomaterials in Molten Salts and Applications by: (Language materials, printed)

Advances in Polymer Processing 2020 = Proceedings of the International Symposium on Plastics Technology / by: (Language materials, printed)

Dictionary of Production Engineering II - Material Removal Processes Wörterbuch der Fertigungstechnik II - Trennende Verfahren Dizionario di Ingegneria della Produzione II - Processi di asportazione di materiale = Trilingual Edition Dreisprachige Ausgabe Edizione completa trilingue. by: (Language materials, printed)

Interface Influence on Moisture Transport in Building Components = The Wetting Process / by: (Language materials, printed)

Biokunststoffe unter dem Blickwinkel der Nachhaltigkeit und Kommunikation = Status quo, Möglichkeiten und Herausforderungen / by: (Language materials, printed)

Reference Materials in Measurement and Technology = Proceedings of the Third International Scientific Conference / by: (Language materials, printed)

Revolutionizing Aircraft Materials and Processes by: (Language materials, printed)

ICAF 2019 – Structural Integrity in the Age of Additive Manufacturing = Proceedings of the 30th Symposium of the International Committee on Aeronautical Fatigue, June 2-7, 2019, Krakow, Poland / by: (Language materials, printed)

Platinum Monolayer Electrocatalysts by: (Language materials, printed)

Handbook of Nonlocal Continuum Mechanics for Materials and Structures by: (Language materials, printed)

Advanced Materials for Defense = Development, Analysis and Applications / by: (Language materials, printed)

Thermophysical Properties and Measuring Technique of Ge-Sb-Te Alloys for Phase Change Memory by: (Language materials, printed)

A Virtual Testing Approach for Honeycomb Sandwich Panel Joints in Aircraft Interior by: (Language materials, printed)

Materials Processing Fundamentals 2020 by: (Language materials, printed)

Handbook of Engineering Practice of Materials and Corrosion by: (Language materials, printed)

Wood & Fire Safety = Proceedings of the 9th International Conference on Wood & Fire Safety 2020 / by: (Language materials, printed)

Integrated Computational Materials Engineering (ICME) = Advancing Computational and Experimental Methods / by: (Language materials, printed)

Solid-State Welding: Friction and Friction Stir Welding Processes by: (Language materials, printed)

Surface Engineering of Modern Materials by: (Language materials, printed)

RF Power Semiconductor Generator Application in Heating and Energy Utilization by: (Language materials, printed)

TMS 2020 149th Annual Meeting & Exhibition Supplemental Proceedings by: (Language materials, printed)

Pineapple Leaf Fibers = Processing, Properties and Applications / by: (Language materials, printed)

Simulation der Dauerfestigkeit einer autofrettierten Kraftstoffverteilerleiste by: (Language materials, printed)

Handbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications by: (Language materials, printed)

Revolution of Perovskite = Synthesis, Properties and Applications / by: (Language materials, printed)

Engineering Design Applications II = Structures, Materials and Processes / by: (Language materials, printed)

Shape Memory Polymers, Blends and Composites = Advances and Applications / by: (Language materials, printed)

Grundlagen der Elektromobilität = Technik, Praxis, Energie und Umwelt / by: (Language materials, printed)

Handbook of Laser Micro- and Nano-Engineering by: (Language materials, printed)

Fibers for Technical Textiles by: (Language materials, printed)

Prozesstechnologie zur Herstellung von FVK-Metall-Hybriden = Ergebnisse aus dem BMBF-Verbundprojekt ProVorPlus / by: (Language materials, printed)

Mechanical Behavior and Fracture of Engineering Materials by: (Language materials, printed)

Deformation Processes in TRIP/TWIP Steels = In-Situ Characterization Techniques / by: (Language materials, printed)

Wooden Façades and Fire Safety = Effects of Joint Type on Ignition Behaviour / by: (Language materials, printed)

Handbook of Bioceramics and Biocomposites by: (Language materials, printed)

Date Palm Fiber Composites = Processing, Properties and Applications / by: (Language materials, printed)

Integrierte Produktentwicklung mit Faser-Kunststoff-Verbunden by: (Language materials, printed)

Electromechanically Active Polymers = A Concise Reference / by: (Language materials, printed)

Energy Technology 2020: Recycling, Carbon Dioxide Management, and Other Technologies by: (Language materials, printed)

Handbook of Mechanics of Materials by: (Language materials, printed)

Lignin = Biosynthesis and Transformation for Industrial Applications / by: (Language materials, printed)

Handbook of Sol-Gel Science and Technology by: (Language materials, printed)

Handbook of Advanced Ceramics and Composites = Defense, Security, Aerospace and Energy Applications / by: (Language materials, printed)

Biointerface Engineering: Prospects in Medical Diagnostics and Drug Delivery by: (Language materials, printed)

Handbook of Spine Technology by: (Language materials, printed)

Advances in Powder and Ceramic Materials Science by: (Language materials, printed)

Vapor Crystal Growth and Characterization = ZnSe and Related II–VI Compound Semiconductors / by: (Language materials, printed)

Mechanics of Composite and Multi-functional Materials, Volume 5 = Proceedings of the 2019 Annual Conference on Experimental and Applied Mechanics / by: (Language materials, printed)

Corrosion Processes = Sensing, Monitoring, Data Analytics, Prevention/Protection, Diagnosis/Prognosis and Maintenance Strategies / by: (Language materials, printed)

Advances in Materials Science and Engineering = Select Proceedings of ICFMMP 2019 / by: (Language materials, printed)

Molecular Nanomagnets = Fundamental Understanding / by: (Language materials, printed)

Mechanics of Metamaterials with Negative Parameters by: (Language materials, printed)

Superconductivity = From Materials Science to Practical Applications / by: (Language materials, printed)

Mikrostrukturbasierte Charakterisierung des Ermüdungs- und Korrosionsermüdungsverhaltens von Lötverbindungen des Austenits X2CrNi18-9 mit Nickel- und Goldbasislot by: (Language materials, printed)

Austenitic TRIP/TWIP Steels and Steel-Zirconia Composites = Design of Tough, Transformation-Strengthened Composites and Structures / by: (Language materials, printed)

Proceedings of the 6th International Conference and Exhibition on Sustainable Energy and Advanced Materials = ICE-SEAM 2019, 16—17 October 2019, Surakarta, Indonesia / by: (Language materials, printed)

Progress in Engineering Technology II by: (Language materials, printed)

The World of Materials by: (Language materials, printed)

Architecting Robust Co-Design of Materials, Products, and Manufacturing Processes by: (Language materials, printed)

Advances in Design, Simulation and Manufacturing III = Proceedings of the 3rd International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2020, June 9-12, 2020, Kharkiv, Ukraine – Volume 1: Manufacturing and Materials Engineering / by: (Language materials, printed)

Dictionary of Production Engineering III – Manufacturing Systems Wörterbuch der Fertigungstechnik III – Produktionssysteme Dizionario di Ingegneria della Produzione III​ – Sistemi di produzione = Trilingual Edition Dreisprachige Ausgabe Edizione completa trilingue. by: (Language materials, printed)

Mold and Core Sands in Metalcasting: Chemistry and Ecology = Sustainable Development / by: (Language materials, printed)

An Insight Into Metal Based Foams = Processing, Properties and Applications / by: (Language materials, printed)

Bismuth-Ferrite-Based Electrochemical Supercapacitors by: (Language materials, printed)

Advances in Mechanical Engineering = Select Proceedings of ICRIDME 2018 / by: (Language materials, printed)

Phase Transformation in Metals = Mathematics, Theory and Practice / by: (Language materials, printed)

Kontinuierliche kraftflussgerechte Textiltechnologien für Leichtbaustrukturen in Großserie = Ergebnisse aus dem BMBF-Verbundprojekt KonText / by: (Language materials, printed)

Dictionary of Production Engineering IV - Assembly Wörterbuch der Fertigungstechnik IV - Montage Dizionario di Ingegneria della Produzione IV - Assemblaggio = Trilingual Edition Dreisprachige Ausgabe Edizione completa trilingue. by: (Language materials, printed)

CT Scan Generated Material Twins for Composites Manufacturing in Industry 4.0 by: (Language materials, printed)

Handbook of Advanced Ceramics and Composites = Defense, Security, Aerospace and Energy Applications / by: (Language materials, printed)

Self-Healing and Self-Recovering Hydrogels by: (Language materials, printed)

Geopolymer and Geopolymer Matrix Composites by: (Language materials, printed)

Engineering of Thermoplastic Elastomer with Graphene and Other Anisotropic Nanofillers by: (Language materials, printed)

Proceedings of the 4th International Symposium on Materials and Sustainable Development = Volume 2: Waste Recycling and Environment / by: (Language materials, printed)

Proceedings of the 2nd International Conference on Microplastic Pollution in the Mediterranean Sea by: (Language materials, printed)

Proceedings of the 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020) by: (Language materials, printed)

Handbook of Nanomaterials and Nanocomposites for Energy and Environmental Applications by: (Language materials, printed)

Lebensdauerberechnungen mit FEM = Von der Last zur Betriebsfestigkeit / by: (Language materials, printed)

Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020) = Volume II / by: (Language materials, printed)

New Approaches of Geotechnical Engineering: Soil Characterization, Sustainable Materials and Numerical Simulation = Proceedings of the 6th GeoChina International Conference on Civil & Transportation Infrastructures: From Engineering to Smart & Green Life Cycle Solutions -- Nanchang, China, 2021 / by: (Language materials, printed)

Limestone Mining in India by: (Language materials, printed)

Fiberglass Science and Technology = Chemistry, Characterization, Processing, Modeling, Application, and Sustainability / by: (Language materials, printed)

Intelligent Quality Assessment of Railway Switches and Crossings by: (Language materials, printed)

Advances in Engineering Materials = Select Proceedings of FLAME 2020 / by: (Language materials, printed)

Laser Cladding of Metals by: (Language materials, printed)

Practical Approach to 3D Weaving by: (Language materials, printed)

Charakterisierung des temperaturabhängigen Ermüdungs- und Schädigungsverhaltens von glasfaserverstärktem Polyurethan und Epoxid im LCF- bis VHCF-Bereich by: (Language materials, printed)

Advances in Manufacturing Engineering and Materials II = Proceedings of the International Conference on Manufacturing Engineering and Materials (ICMEM 2020), 21–25 June, 2021, Nový Smokovec, Slovakia / by: (Language materials, printed)

CFK-Bearbeitung = Trenntechnologien für Faserverbundkunststoffe und den hybriden Leichtbau / by: (Language materials, printed)

Adaptronics – Smart Structures and Materials by: (Language materials, printed)

Energy-Sustainable Advanced Materials by: (Language materials, printed)

Data Technology in Materials Modelling by: (Language materials, printed)

Multiscale Solid Mechanics = Strength, Durability, and Dynamics / by: (Language materials, printed)

Phenolic Polymers Based Composite Materials by: (Language materials, printed)

Novel Lanthanum Zirconate-based Thermal Barrier Coatings for Energy Applications by: (Language materials, printed)

Artificial Intelligence for Materials Science by: (Language materials, printed)

Bamboo Fiber Composites = Processing, Properties and Applications / by: (Language materials, printed)

Fracture, Fatigue, Failure and Damage Evolution , Volume 3 = Proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics / by: (Language materials, printed)

Handbook of Spine Technology by: (Language materials, printed)

Advances in Mechanical Processing and Design = Select Proceedings of ICAMPD 2019 / by: (Language materials, printed)

Proceedings of the 6th International Conference on Industrial Engineering (ICIE 2020) = Volume I / by: (Language materials, printed)

Sustainable Issues in Infrastructure Engineering = The official 2020 publication of the Soil-Structure Interaction Group in Egypt (SSIGE) / by: (Language materials, printed)

Structural Health Monitoring System for Synthetic, Hybrid and Natural Fiber Composites by: (Language materials, printed)

Challenges in Mechanics of Time Dependent Materials, Volume 2 = Proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics / by: (Language materials, printed)

Dynamic Behavior of Materials, Volume 1 = Proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics / by: (Language materials, printed)

Strength of Materials by: (Language materials, printed)

Tribological Applications of Composite Materials by: (Language materials, printed)

Materials Research and Applications = Select Papers from JCH8-2019 / by: (Language materials, printed)

Contemporary Nanomaterials in Material Engineering Applications by: (Language materials, printed)

Graphene Based Biopolymer Nanocomposites by: (Language materials, printed)

High-Performance Ferrous Alloys by: (Language materials, printed)

Functional Textiles and Clothing 2020 by: (Language materials, printed)

Machining and Machinability of Fiber Reinforced Polymer Composites by: (Language materials, printed)

Carbide in Special Steel = Formation Mechanism and Control Technology / by: (Language materials, printed)

Mechanics of Composite, Hybrid and Multifunctional Materials , Volume 6 = Proceedings of the 2020 Annual Conference on Experimental and Applied Mechanics / by: (Language materials, printed)

Innovations in Everyday Engineering Materials by: (Language materials, printed)

Advances in Hybrid Conducting Polymer Technology by: (Language materials, printed)

Crosslinkable Polyethylene Based Blends and Nanocomposites by: (Language materials, printed)

Eco-Friendly Adhesives for Wood and Natural Fiber Composites = Characterization, Fabrication and Applications / by: (Language materials, printed)

Classical and Relativistic Rational Extended Thermodynamics of Gases by: (Language materials, printed)

Computational Materials, Chemistry, and Biochemistry: From Bold Initiatives to the Last Mile = In Honor of William A. Goddard’s Contributions to Science and Engineering / by: (Language materials, printed)

Biocomposite Materials = Design and Mechanical Properties Characterization / by: (Language materials, printed)

Electrochemical Methods of Nanostructure Preparation by: (Language materials, printed)

Collagen Biografts for Tunable Drug Delivery by: (Language materials, printed)

Environmental Remediation Through Carbon Based Nano Composites by: (Language materials, printed)

Ammonothermal Synthesis and Crystal Growth of Nitrides = Chemistry and Technology / by: (Language materials, printed)

Graphene and Nanoparticles Hybrid Nanocomposites = From Preparation to Applications / by: (Language materials, printed)

Cold Spray Additive Manufacturing = From Fundamentals to Applications / by: (Language materials, printed)

Electrospinning for Advanced Energy Storage Applications by: (Language materials, printed)

Comprehensive Utilization of Magnesium Slag by Pidgeon Process by: (Language materials, printed)

Friction Stir Welding and Processing XI by: (Language materials, printed)

Ni-Co 2021: The 5th International Symposium on Nickel and Cobalt by: (Language materials, printed)

Materials with Extreme Wetting Properties = Methods and Emerging Industrial Applications / by: (Language materials, printed)

Materials Engineering—From Ideas to Practice: An EPD Symposium in Honor of Jiann-Yang Hwang by: (Language materials, printed)

Crosslinkable Polyethylene = Manufacture, Properties, Recycling, and Applications / by: (Language materials, printed)

Inert Anodes for Aluminum Electrolysis by: (Language materials, printed)

Manufacturing Automotive Components from Sustainable Natural Fiber Composites by: (Language materials, printed)

Materials, Design, and Manufacturing for Sustainable Environment = Select Proceedings of ICMDMSE 2020 / by: (Language materials, printed)

Advances in Design, Simulation and Manufacturing IV = Proceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2021, June 8–11, 2021, Lviv, Ukraine – Volume 1: Manufacturing and Materials Engineering / by: (Language materials, printed)

Advances in Design, Simulation and Manufacturing IV = Proceedings of the 4th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2021, June 8–11, 2021, Lviv, Ukraine – Volume 2: Mechanical and Chemical Engineering / by: (Language materials, printed)

Angewandte Bauphysik und Werkstoffkunde naturfaserverstärkter Kunststoffe = Eine Anleitung für Studium und Praxis / by: (Language materials, printed)

Thermoplastische, rollgeformte Profile in Hybridbauweise 2 - TroPHy2 = Forschungsberichte aus dem Forschungscampus Open Hybrid LabFactory / by: (Language materials, printed)

Physics and Chemistry of Te and HgTe-based Ternary Semiconductor Melts by: (Language materials, printed)

Advances in Machining of Composite Materials = Conventional and Non-conventional Processes / by: (Language materials, printed)

Physical Chemistry of Metallurgical Processes, Second Edition by: (Language materials, printed)

Advances in Materials Processing and Manufacturing Applications = Proceedings of iCADMA 2020 / by: (Language materials, printed)

Materials Design and Applications III by: (Language materials, printed)

Thermal Spray Fundamentals = From Powder to Part / by: (Language materials, printed)

Advances in Mechanical Engineering = Select Proceedings of CAMSE 2020 / by: (Language materials, printed)

Iron-Based Superconducting Thin Films by: (Language materials, printed)

3D-Druck mit lebenden Zellen = Materialentwicklung, Prozesscharakterisierung und Perspektiven für die Pflanzenbiotechnologie / by: (Language materials, printed)

Festigkeitslehre für Wirtschaftsingenieure = Mit Verständnisfragen, vielen Beispielen und Aufgaben mit kleinschrittigen Lösungen / by: (Language materials, printed)

Structural Materials = Behavior, Testing and Evaluation / by: (Language materials, printed)

Ten Materials That Shaped Our World by: (Language materials, printed)

6th International Conference on Adhesive Bonding 2021 = Selected Contributions of AB 2021 / by: (Language materials, printed)

Handbook of Laser Micro- and Nano-Engineering by: (Language materials, printed)

Schweiß- und Lötverbindungen und ihre Prüfung = Lehr- und Arbeitsbuch für Ausbildung und Praxis / by: (Language materials, printed)

High-Entropy Materials: Theory, Experiments, and Applications by: (Language materials, printed)

Flexible Metal Forming Technologies = Principles, Process and Equipment / by: (Language materials, printed)

Chitin and Chitosan = Science and Engineering / by: (Language materials, printed)

Praxishandbuch der Kreislauf- und Rohstoffwirtschaft by: (Language materials, printed)

Systemleichtbau für die Luftfahrt by: (Language materials, printed)

Solid State Engineering Physics by: (Language materials, printed)

Premetered Coating Methods = Attractiveness and Limitations / by: (Language materials, printed)

Advanced Nanomaterials by: (Language materials, printed)

Additive Manufacturing Classification by: (Language materials, printed)

Bruchmechanische Bauteilbewertung by: (Language materials, printed)

Fire Hazards of Electrical Cables by: (Language materials, printed)

Rubies and Implants = Aluminium oxide and Its Diverse Facets / by: (Language materials, printed)

Pigments, Extenders, and Particles in Surface Coatings and Plastics = Fundamentals and Applications to Coatings, Plastics and Paper Laminate Formulation / by: (Language materials, printed)

Fehler vor, während und nach der Wärmebehandlung von Stahl by: (Language materials, printed)

Engineering Elasticity = Elasticity with less Stress and Strain / by: (Language materials, printed)

Fertigungstechnik by: (Language materials, printed)

High Entropy Materials = Processing, Properties, and Applications / by: (Language materials, printed)

Kombination von Automated Fibre Placement und Additive Layer Manufacturing by: (Language materials, printed)

Advances in Design, Simulation and Manufacturing V = Proceedings of the 5th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2022, June 7–10, 2022, Poznan, Poland – Volume 1: Manufacturing and Materials Engineering / by: (Language materials, printed)

Recent Advances in Materials and Modern Manufacturing = Select Proceedings of ICAMMM 2021 / by: (Language materials, printed)

Advanced Transdisciplinary Engineering and Technology by: (Language materials, printed)

Philosophy and Engineering Education = New Perspectives, An Introduction / by: (Language materials, printed)

Designing Engineering and Technology Curricula = Embedding Educational Philosophy / by: (Language materials, printed)

Philosophy and Engineering Education = Practical Ways of Knowing / by: (Language materials, printed)

Nanotechnology, Lessons from Nature = Discoveries, Research and Applications / by: (Language materials, printed)

Carbon Composite Catalysts = Preparation, Structural and Morphological Property and Applications / by: (Language materials, printed)

Novel Lights Sources Beyond Free Electron Lasers by: (Language materials, printed)

Advanced Engineering of Materials Through Lasers by: (Language materials, printed)

Proceedings of the 7th International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2021), Melaka, Malaysia by: (Language materials, printed)

Flexible OLEDs = Fundamental and Novel Practical Technologies / by: (Language materials, printed)

Reference Materials in Measurement and Technology = Proceedings of the Fourth International Scientific Conference / by: (Language materials, printed)

Additive, Subtractive, and Hybrid Technologies = Recent Innovations in Manufacturing / by: (Language materials, printed)

Future Landscape of Structural Materials in India by: (Language materials, printed)

Advances in Nanocomposite Materials for Environmental and Energy Harvesting Applications by: (Language materials, printed)

Bio-Fiber Reinforced Composite Materials = Mechanical, Thermal and Tribological Properties / by: (Language materials, printed)

Mechanism-Based Assessment of Structural and Functional Behavior of Sustainable Cottonid by: (Language materials, printed)

Charakterisierung und Modellierung des Ermüdungsverhaltens und der Schädigungstoleranz aushärtbarer Al-Si-Mg-Gusslegierungen im HCF- und VHCF-Bereich by: (Language materials, printed)

Electron Beam Wire Deposition Technology and Its Application by: (Language materials, printed)

2021 International Conference on Development and Application of Carbon Nanomaterials in Energetic Materials by: (Language materials, printed)

Resistive Switching: Oxide Materials, Mechanisms, Devices and Operations by: (Language materials, printed)

Advanced MEMS/NEMS Fabrication and Sensors by: (Language materials, printed)

Advanced Materials and Engineering Technologies by: (Language materials, printed)

Recent Advances in Manufacturing Engineering and Processes = Proceedings of ICMEP 2021 / by: (Language materials, printed)

Fundamentals of Metal Joining = Processes, Mechanism and Performance / by: (Language materials, printed)

Local and Nonlocal Micromechanics of Heterogeneous Materials by: (Language materials, printed)

Advanced Materials = An Introduction to Modern Materials Science / by: (Language materials, printed)

Welding Simulations Using ABAQUS = A Practical Guide for Engineers / by: (Language materials, printed)

Hydrometallurgy = Fundamentals and Applications / by: (Language materials, printed)

Impact Damages of Braided Composites by: (Language materials, printed)

Advancement in Materials, Manufacturing and Energy Engineering, Vol. I = Select Proceedings of ICAMME 2021 / by: (Language materials, printed)

High-Performance Composite Structures = Additive Manufacturing and Processing / by: (Language materials, printed)

Challenges in Mechanics of Time Dependent Materials, Mechanics of Biological Systems and Materials & Micro-and Nanomechanics, Volume 2 = Proceedings of the 2021 Annual Conference & Exposition on Experimental and Applied Mechanics / by: (Language materials, printed)

Advances in Mechanical and Materials Technology = Select Proceedings of EMSME 2020 / by: (Language materials, printed)

Nondestructive Testing and Evaluation of Fiber-Reinforced Composite Structures by: (Language materials, printed)

Mechanics of Composite, Hybrid and Multifunctional Materials, Fracture, Fatigue, Failure and Damage Evolution, Volume 3 = Proceedings of the 2021 Annual Conference on Experimental and Applied Mechanics / by: (Language materials, printed)

Advancement in Materials Processing Technology = Select Proceedings of AMPT 2020 / by: (Language materials, printed)

COVID-19 Pandemic = Research and Development Activities from Modeling to Realization / by: (Language materials, printed)

Hydrogen in Engineering Metallic Materials = From Atomic-Level Interactions to Mechanical Properties / by: (Language materials, printed)

Silicon Sensors and Actuators = The Feynman Roadmap / by: (Language materials, printed)

Advances in Manufacturing III = Volume 4 - Measurement and Control Systems: Research and Technology Innovations, Industry 4.0 / by: (Language materials, printed)

Proceedings of the 7th International Conference on Nanomanufacturing (nanoMan2021) by: (Language materials, printed)

Precision Forging Technology and Equipment for Aluminum Alloy by: (Language materials, printed)

Advancement in Materials, Manufacturing and Energy Engineering, Vol. II = Select Proceedings of ICAMME 2021 / by: (Language materials, printed)

Hydrogen Assisted Direct Reduction of Iron Oxides by: (Language materials, printed)

Characterization of Nanomaterials in Liquid Disperse Systems by: (Language materials, printed)

Advances in Mechanical Engineering and Material Science = Select Proceedings of ICAMEMS-2022 / by: (Language materials, printed)

In Situ Characterization Methodology for the Design and Analysis of Composite Pressure Vessels by: (Language materials, printed)

Advances in Manufacturing III = Volume 1 - Mechanical Engineering: Research and Technology Innovations, Industry 4.0 / by: (Language materials, printed)

Materials, Structures and Manufacturing for Aircraft by: (Language materials, printed)

Smelter Grade Alumina from Bauxite = History, Best Practices, and Future Challenges / by: (Language materials, printed)

Theory and Technology of Roll Stamping by: (Language materials, printed)

REWAS 2022: Developing Tomorrow’s Technical Cycles (Volume I) by: (Language materials, printed)

Characterization of Minerals, Metals, and Materials 2022 by: (Language materials, printed)

Furnace Tapping 2022 by: (Language materials, printed)

Recent Trends in Design, Materials and Manufacturing = Selected Proceedings of ICRADMM 2020 / by: (Language materials, printed)

12th International Symposium on High-Temperature Metallurgical Processing by: (Language materials, printed)

TMS 2022 151st Annual Meeting & Exhibition Supplemental Proceedings by: (Language materials, printed)

Textile and Fashion Education Internationalization = A Promising Discipline from South Asia / by: (Language materials, printed)

Metal-Matrix Composites = Advances in Processing, Characterization, Performance and Analysis / by: (Language materials, printed)

Electron Microscopy in Science and Engineering by: (Language materials, printed)

Konstruierte Stabilität = Die Geschichte von Verbundwerkstoffen im 19. und 20. Jahrhundert / by: (Language materials, printed)

Engineering Design Applications IV = Structures, Materials and Processes / by: (Language materials, printed)

Topological States for New Modes of Information Storage and Transfer = A Survey of the Status of the Discovery of the Majorana Modes in the Solid State / by: (Language materials, printed)

Lignocellulosic Fibers = Sustainable Biomaterials for Green Composites / by: (Language materials, printed)

Essentials of Applied Mathematics for Scientists and Engineers by: (Language materials, printed)

Relativistic Flight Mechanics and Space Travel by: (Language materials, printed)

Project Management for Engineering Design by: (Language materials, printed)

Tensor Properties of Solids, Part One = Equilibrium Tensor Properties of Solids / by: (Language materials, printed)

Tensor Properties of Solids, Part Two = Transport Properties of Solids / by: (Language materials, printed)

Theory and practice of thermal transient testing of electronic components by: (Language materials, printed)

Multifunctional boron-nitride composites = preparation, properties and applications / by: (Language materials, printed)

Electroslag remelting towards clean steel by: (Language materials, printed)

Additive manufacturing = design, processes and applications / by: (Language materials, printed)

Engineering design applications IV = structures, materials and processes / by: (Language materials, printed)

Thin-walled composite protective structures for crashworthiness applications = recent advances and future developments / by: (Language materials, printed)

Semiconducting metal oxides for gas sensing by: (Language materials, printed)

Proceedings of the 3rd annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2022).. Volume 1,. Advanced materials and manufacturing technologies by: (Language materials, printed)

Proceedings of the 8th International Conference on Mechanical, Automotive and Materials Engineering = CMAME 2022, 16-18 December, Hanoi, Vietnam / by: (Language materials, printed)

Nanomaterials based printed strain sensor for wearable health monitoring applications by: (Language materials, printed)

Recycled polymer blends and composites = processing, properties, and applications / by: (Language materials, printed)

Proceedings of the 6th Asia Pacific Conference on Manufacturing Systems and 4th International Manufacturing Engineering Conference = APCOMS-IMEC 2022, Surakarta, Indonesia / by: (Language materials, printed)

Proceedings of the International Symposium on Lightweight and Sustainable Polymeric Materials (LSPM23) by: (Language materials, printed)

Selected papers from ICIR EUROINVENT - 2023 = International Conference on Innovative Research / by: (Language materials, printed)

Proceedings of the 3rd International Conference on Microplastic Pollution in the Mediterranean Sea by: (Language materials, printed)

Progress in continuum mechanics by: (Language materials, printed)

Proceedings of the 28th International Cryogenic Engineering Conference and International Cryogenic Materials Conference 2022 = ICEC28-ICMC 2022, Hangzhou, China / by: (Language materials, printed)

Vanadium-based nanomaterials for electrochemical energy storage by: (Language materials, printed)

70 years of China's bridges by: (Language materials, printed)

Materialising the future = a learning path to understand, develop and apply emerging materials and technologies / by: (Language materials, printed)

The ECPH encyclopedia of mining and metallurgy by: (Language materials, printed)

Advances in design, simulation and manufacturing VII = proceedings of the 7th International Conference on Design, Simulation, Manufacturing: The Innovation Exchange, DSMIE-2024, June 4-7, 2024, Pilsen, Czech Republic.. Volume 2,. Mechanical and materials engineering / by: (Language materials, printed)

Advances in manufacturing and materials = select proceedings of FLUTE 2023 / by: (Language materials, printed)

Advanced welding methods and equipment by: (Language materials, printed)

Innovations in mechanical engineering III by: (Language materials, printed)

Recent advances in materials and manufacturing = proceedings of ISME 2023 / by: (Language materials, printed)

Materials science = theory and engineering / by: (Language materials, printed)

Engineering design applications VI = structures, materials and processes / by: (Language materials, printed)

The engineer's guide to materials = an applications-focused introduction to materials science / by: (Language materials, printed)

Advanced materials and conversion technologies for personal protective equipment used in the COVID-19 pandemic by: (Language materials, printed)

Advancements in materials processing technology. = select proceedings of AMPT 2023 /. Volume 1 by: (Language materials, printed)

Sustainable materials and manufacturing techniques in aviation by: (Language materials, printed)

Advances in manufacturing for aerospace alloys by: (Language materials, printed)

Hybrid-energy cutting of aerospace alloys by: (Language materials, printed)

Recent advances in mechanics of functional materials and structures = proceedings of the 8th Asian Conference on Mechanics of Functional Materials and Structures 2022 / by: (Language materials, printed)

Design and modeling of mechanical systems - VI = proceedings of the 10th Conference on Design and Modeling of Mechanical Systems, CMSM'2023, December 18-20, 2023, Hammamet, Tunisia.. Volume 2,. Materials engineering and manufacturing / by: (Language materials, printed)

Textile materials for good health and wellbeing = design and applications / by: (Language materials, printed)

Garment sizing and pattern making by: (Language materials, printed)

Thermoplastic processing of structural metallic materials = experiments, theory, and modeling / by: (Language materials, printed)

3D printing in space = an illustrated introduction / by: (Language materials, printed)

Advancement of science and technology = materials and energy / by: (Language materials, printed)

Advances in mechanics of materials for environmental and civil engineering by: (Language materials, printed)

Progress in hydrogen energy, fuel cells, nano-biotechnology and advanced, bioactive compounds by: (Language materials, printed)

Introduction to electromobility = technology, best practice, energy and environment / by: (Language materials, printed)

Sustainable development research in materials and energy = advancement of science and technology / by: (Language materials, printed)

Recent advances in machines, mechanisms, materials and design = select proceedings of iNaCoMM 2023 / by: (Language materials, printed)

Advancements in materials processing technology. = select proceedings of AMPT 2023 /. Volume 2 by: (Language materials, printed)

Rubber based bionanocomposites = characterisation / by: (Language materials, printed)

Nanotechnology in textile finishing = advancements and applications / by: (Language materials, printed)

Proceedings of the 10th International Conference on Mechanical, Automotive and Materials Engineering = CMAME 2023, 20-22 December, Da Nang, Vietnam / by: (Language materials, printed)

Recent advances in mechanical engineering = select proceedings of ICMET 2023 / by: (Language materials, printed)

Advances in nanomaterials for detection, control, and removal of environmental pollutants by: (Language materials, printed)

Physics and mechanics of new materials and their applications = proceedings of the International Conference PHENMA 2024 / by: (Language materials, printed)

Engineering design applications VII by: (Language materials, printed)

Challenges and innovations in 3D printed bio-organs and their materials by: (Language materials, printed)

Non-destructive methodologies and adapted signal processing techniques in the field of cultural heritage by: (Language materials, printed)

Advanced composites = applications for Covid-19 and beyond / by: (Language materials, printed)

Engineering materials = fundamentals, processing and properties / by: (Language materials, printed)

Design load allowables for composite plates exposed to thermomechanical loads by: (Language materials, printed)

Failure in aircraft materials by: (Language materials, printed)

Handbook of non-metallic inclusions in steels by: (Language materials, printed)

Sinter plants = evolution, challenges, and future perspectives / by: (Language materials, printed)

Sustainable development research in materials and renewable energy engineering = advancements of science and technology / by: (Language materials, printed)

Advances in ceramic materials and processing by: (Language materials, printed)

Introduction to electrospinning and nanofiber by: (Language materials, printed)

Development of a self-sufficient, wireless sensor node using the outer FML layer as an antenna by: (Language materials, printed)

Advances in materials engineering = select proceedings of ICAFAMMT 2024 / by: (Language materials, printed)

Materials processing fundamentals 2025 = thermodynamics and rate phenomena / by: (Language materials, printed)

Smart Innovation in Mechanical Engineering = select proceedings of ICOME 2023, 30-31 August, Bali, Indonesia / by: (Language materials, printed)

Introduction to elasticity, fracture and fatigue by: (Language materials, printed)

Biodegradable PBAT plastics and composites by: (Language materials, printed)

Advances in materials and processing = proceedings of MET and HTS 2022 / by: (Language materials, printed)

Modeling of Z-pinned carbon fiber-reinforced polymer (CFRP) composite = curing process and mechanical properties / by: (Language materials, printed)

The influence of environment on mechanical characteristics of key semiconductor components by: (Language materials, printed)

Fe-based amorphous alloys with high glass forming ability by: (Language materials, printed)

Magnesium-based hydrogen storage materials by: (Language materials, printed)

Applications of nanomaterials in civil and environmental engineering = towards sustainable development and environment remediation / by: (Language materials, printed)

Critical infrastructure protection = advanced technologies for crisis prevention and response / by: (Language materials, printed)

Recent advances on waterborne epoxy coatings = synthesis, properties and applications / by: (Language materials, printed)

Dictionary of concrete technology by: (Language materials, printed)

Biomedical applications of microbial nanomaterials by: (Language materials, printed)

Smart fluid technologies by: (Language materials, printed)

Metal science in modern manufacturing technologies by: (Language materials, printed)

Ten materials that shaped our world by: (Language materials, printed)

Electronic materials innovations and reliability in advanced memory packaging by: (Language materials, printed)

Novel materials and technologies for energy and environment applications. = select proceedings of NMTE2A 2024 /. Volume 1 by: (Language materials, printed)

Biodegradable metallic materials = design, development and characterization / by: (Language materials, printed)

High-performance textile composites = characteristics and applications / by: (Language materials, printed)

Recent advances in materials and manufacturing science = select proceedings of ICRAM 2025 / by: (Language materials, printed)

Advances in materials and manufacturing = select proceedings of ICDMT 2024 / by: (Language materials, printed)

Recent trends in materials and devices = select proceedings of ICRTMD 2023 / by: (Language materials, printed)

Manual of mineral material science by: (Language materials, printed)